Bandsaw Circle Cutter, Success
Jim Shaver Oakville, Ont.
>Hi,
A few days ago I asked for some help regarding a bandsaw circle cutter. Jesper quickly posted some pictures of one he made and I copied it today. Lee Schierer also supported some thoughts and an email that I took to heart and here are my results.
A simple jig made of 3/8" Baltic birch plywood with a front and side stop.
I used a �� dowel as a pivot point, drilling a hole at the diameter I wanted and a shallow hole in the underside of the piece being cut.
And here you go, an 18� top for a small table I am making. More on the table over the next short while.
Thanks again Jesper and Lee!
Take care,
Jim







