Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Cold weather gluing question

Posts

Cold weather gluing question

#1

Cold weather gluing question

Bruce, a MN Galoot

>I know, I know, we should be able to drop this cold weather business for the foreseeable future. However, here in MN, the forecast is for snow and cold for the weekend.

I'm gluing up a table for my daughter, just put the last two legs on it. The temperature in the shop is 55 F, but it's scheduled to drop into the low 40's tonight.

Titebond requires a 24 set period before stressing, but if I managed to get 2-3 hours before the temperature drops into the 40's, will that be sufficient time to allow the glue to set or should I take it in and let it set up further inside tonight?

Thanks. Gluing in MN is always a problem in the winter (not to mention Bismarck, ND, where I l.ived for 17 years).

Bruce, looking forward to warmth.

Re: Cold weather gluing question

#2

Re: Cold weather gluing question

Glenn Madsen, SF Bay Area

>I'm a Californian, so what do I know? We have our cold weather in the summer, or so it seems, at least in San Francisco.

I'd take it inside, if I could easily, and give it a warm night in the house. Why not?

If it's an 8' monster, then, maybe not...

Re: Cold weather gluing question

#3

why risk

Bill Tindall, E.TN

>get it in the clamps and then take it into living area.

We just got in from canoeing down the river. It is still in low 70's with a fresh breeze that suggests rain tomorrow. . Geese have babies floating about.

What has to happen is that the glue balls that were suspended in the water, they need to coalesce. If it is too cold they aren't soft enough to fuse together and make a strong film.

Re: Cold weather gluing question

#4

Re: Cold weather gluing question

Chuck in ND

>Bismarck ? Did someone say Bismarck, ND ? I've been here for about 31 years. On the cold days I have a hobby shop in the basement that I glue my projects in, and I do all my finishing in there, winter, spring, summer and fall, because there is less dust. My detached garage / shop is only heated with a forced air wood stove and could be insulated better, so glueing in the winter time isn't a option unless I want to spend 24 hours stokeing the stove.

Re: Cold weather gluing question

#5

Re: Cold weather gluing question

Kirk (KC) Constable

>NO. Try if you like, but if your glue lines looks chalky white in the morning, just go ahead and cut it back apart and wait for spring.

Got an electric blanket? Cover your glueup with it. I try to 'tuck' the blanket underneath somehow so I have a tent.

Re: Cold weather gluing question

#6

Found this on the Titebond site:

Bruce, a MN Galoot

>"With dimension stock lumber, the wood insulates it well enough that if the wood was warm when it went together, it would stay warm long enough." (but it doesn't give a time period) Later, Titebond says that "The temperature while gluing veneer usually needs to stay above the chalk temperature for at least two hours."

So, for the sake of a guideline, I'm going to assume that two hours would be a long enough cure time before cooling off.

Just to be safe, I brought the table inside last night, bumping the walls only twice.

Thanks to everyone.

Bruce

Re: Cold weather gluing question

#7

Yup, Bismarck

Bruce, a MN Galoot

>We lived straight south of Dorothy Moses about three blocks.

Bruce, who still thinks it's a darn good town.

Re: Cold weather gluing question

#8

Re: Yup, Bismarck

Chuck in ND

>I prefer south eastern Idaho, not much to do here in Bismarck. I married the farmers daughter so I'm kinda stuck here.

Re: Cold weather gluing question

#9

alternative

Bill Tindall, E.TN

>I was attracted to the idea of you sleeping with it under the electric blanket out in the shop.

Re: Cold weather gluing question

#10

Re: alternative

Chuck in ND

>LOL Bill, people might think the two of you are married to each other now.

Re: Cold weather gluing question

#11

I'll do that

Bruce, a MN Galoot

>when you take an electric blanket on your next trip canoing in the Boundary Waters...:-)

How's your cousin?

bh