Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Who sharpens your jointer knives?

Posts

Who sharpens your jointer knives?

#1

Who sharpens your jointer knives?

JohnM in Mid Mich

>I need to have my jointer knives sharpened (12", stealth gloat?). Seems like quality work would be beneficial on this. Or is any old local sharp-shop OK? If I'm going to send them out, does anybody have a recommendation? I'm in central Michigan - Lansing area (but heck, I send my saw blades to Forrest, so once I'm mailing them, "local" probably doesn't matter...).

John

Re: Who sharpens your jointer knives?

#2

Re: Who sharpens your jointer knives?

Pete in Holland, MI

>I have a shop here in town that does all sorts of blade & cutter sharpening. They do an fine job. Most likely, the guy with saw blade sharpening stuff in his basement won't be able to do them. Check a local "true" hardware for sources.

Re: Who sharpens your jointer knives?

#3

They are supposed to be sharpened?

Virgil Johnson, Versailles KY

>Forrest Mfg. I did it myself once. After that I sent em out.

Re: Who sharpens your jointer knives?

#4

Re: Who sharpens your jointer knives?

Ralph Turney in Socal

>Send them to Forrest, I don't see the charges anywhere, but I do remember that they do them. I'm getting ready to send them a couple of sets myself. A few year ago, I had a very reputable dealer send them to their local guy for me and he put a nice arc in them, when you put them on a flat surface they were about a 1/16" on each side (great for the rocker on your hockey blades but kind of useless on jointer blades). Forrest does a quality job on blades, and I would trust them with jointer blades.

Ralph

Re: Who sharpens your jointer knives?

#5

Send Them To Scott Whiting

George@Colonel's Workshop-Havertown PA

>Always send mine to Scott's Sharpening Service in Glendale AZ. 1-623-931-0633 Excellent work.

George

Re: Who sharpens your jointer knives?

#6

Second Scott

Earl

>

Re: Who sharpens your jointer knives?

#7

Re: Who sharpens your jointer knives?

Dick Coers

>Cobb Industrial Grinding

410 Cole St.

East Peoria, IL 61611

309-699-5414

Great people and cheap prices. They grind a lot of paper knives. Their machine has a 16' magnetic chuck so they line up all three knives, mic them off the edge, and shoot all three blades at the same time. All blades will be the exact same width, so no balance problems. They will then hone off the wire edge, either on a German honing machine, or hand hone. You'll be able to shave with them when they come back.

I usually talk with Chris when I take my blades in. His Dad, Don, will also take care of you, but is in the shop a little less all the time.

Re: Who sharpens your jointer knives?

#8

What you have to sharpen the knives

Dustmaker Mike

>I guess I would have to start using mine to get them dull first.

Re: Who sharpens your jointer knives?

#9

There are perils

Bill Tindall, E.TN

>In my experience there are more places that can screw up a 12" knife than there are that will keep them straight when regrinding them. For some reason many of the places I have tried over the years ground them is a way that left the edge no longer straight. Needless to day, this situation complicates reinstallation. You will probably be safe sending/taking them to where professional shops and factories have their woodworking tools sharpened.

I use Misenheimer, Morristown, TN 423 587 4300. They make and sharpen tooling for the regional furniture industry. Give them a credit card number to avoid COD charges.

Get some band saw blades while you are at it. I just got some and they were $5.70 for 93". They will be Lenox or Sterrett.

Re: Who sharpens your jointer knives?

#10

Tormek

Pat Evans

>I spent the money for a Tormek and the jointer knife jig, so I felt I had to do mine myself. I don't recommend it unless you are up for a challenge. Not hard to get sharp, but extremely difficult to get a completely straight edge. Figure on spending a whole day.

Re: Who sharpens your jointer knives?

#11

Re: Tormek

Tony - Memphis

>Thanks for the info. I've considered buying the jig, but for that kind of money, sounds like it may be too much hassle. I don't sharpen them that often anyway. I have sent mine out to a local guy that didn't do so hot. I'l try Scott next time. I bought the Lee Valley jig and use that to hone them. It works quite well.

Tony

Re: Who sharpens your jointer knives?

#12

I do

Garrett in Victoria

>I have a Tormek with the jig for jointer and planer knives. Removes very little metal, produces excellent edges, and does it all quickly and without any angst.

The Tormek package wasn't cheap, but taking into account the time to deliver and pick up knives from a sharpening service, it atually isn't a bad deal over time. And, with several companies - e.g. Jet & Grizzly - bringing out relatively inexpensive Tormek copies, the price of the original should come down.

Now, if it could only do my tablesaw blades.

Cheers, Garrett

Re: Who sharpens your jointer knives?

#14

DISPOZ-A-BLADE System

Ray Newman

>I gave up trying to even find a satisfactory, much less a good sharpening service around where I live.

So bit the bullet & installed the Dispoza knife system on my 8" jointer. Initial start up was a bit, but ea. blade has two edges & they are snap to change -- maybe 15 minutes for all 3 knives!

Sure beats packaging & sending them out. & it seems to me that I only nick a blade on Saturday night or during a holiday weekend.

Since they have large planer blades, they just might have what you need.

www.estausa.com/index.html

http://www.estausa.com/index.html

Re: Who sharpens your jointer knives?

#15

Re: Who sharpens your jointer knives? *LINK*

Craig Frasa

>John,

You might try Johnson's in Charlotte....http://www.theworkbench.com/

I get mine done at Elliot Saw Works in Ferndale

Elliott Saw Works

22000 Woodward Ave

Ferndale, MI 48220

Phone: (248) 398-0440

Good Luck!

Craig in Clarkston


http://www.theworkbench.com/

Re: Who sharpens your jointer knives?

#16

Re: Who sharpens your jointer knives?

Herb Yost

>If you have a printing plant in your area, check with them to see who sharpens their cutter knives. that's how I found my sharpening service and they've done great work.

Re: Who sharpens your jointer knives?

#17

Jim DeLaney, Austintown, Ohio

Re: DISPOZ-A-BLADE System

Jim DeLaney, Austintown, Ohio

>Yeah, they're great! I have them on both my jointer and my 15" planer. As you said, initial purchase is a bit steep, but I figured that, at local costs for 'regular' replacement blades, and sharpenings, I'd be ahead after only six edges on the jointer and eight on the planer.

Jim D.

Re: Who sharpens your jointer knives?

#18

Tormek for me as well

wilbur

>I've had real good luck with the Tormek planer knife jig. The local sharpening place costs about $25 a set of knives, and I managed to get the planer knife jig on sale, so I figure that after the fourth sharpening, I'll come out ahead. One down, three to go.

I've found that jig to be useful for some other wide blades that I have, too.

Re: Who sharpens your jointer knives?

#19

Bart Goldberg

Re: DISPOZ-A-BLADE System

Bart Goldberg

>For just a little more than the cost of the dispoz-a-blade system, I purchased a spiral cutter head. I think the dispoz-a-blade is a bit overpriced for what they offer, IMHO.

My 2 cents

Bart

Re: Who sharpens your jointer knives?

#20

Re: Who sharpens your jointer knives?

Terry Quiram, Roanoke Illinois

>John

Is there an industrial grinding shop in your area? That is where I get all my blades sharpened. They don't usually have walk in business but may help you out.

Terry