Re: OT: Dyson . . . too much ? . . .
Frank
>I strongly suggest you DO NOT buy a Dyson. We have one and for the first year it seemed to work OK, at least it seemed to do the job. The biggest problem in using it was it didn't fit under cabinet fronts. The brush housing is too high so we had to resort to using the extension hose and cleaning wand just to get under the kitchen cabinets. That was tolerable as long as the vacuum was working.
Then one day the belt drive stopped working. I live in a metropolitan area so I called around to several vacuum repair shops to see if I could get a belt. Only one out of 4 shops carried Dyson parts, the other 3 said they found them a pain to work on and didn't like dealing with the company. The 1 shop that carried parts said they'd sell me the belt but there was no way I could replace it without having special tools from Dyson which they wouldn't sell to consumers anyway. Not only that, but Dyson also controlled the repair price for each job. So, if he charged less than Dyson specified he could lose his access to parts. My simple belt repair cost over $90 to get fixed. The shop owner was apologetic but said that's the way it is with Dyson. He said they were very arrogant in their dealings with customers and repair shops and that the units were all plastic and no better built than any of the other mid-priced units, they were just much better at marketing their products.
When I asked which brands he recommended he basically said any of the other similarly priced or even lower priced units. His opinion was the currently made upright vacuums in general do a pretty good cleaning job due to competition and that the more expensive units don't necessarily clean any better, they may have a few more features (whether useable or not) and tend to last longer due to better construction. He sold several brands priced both above and below Dyson, said they were all much better construction and a lot easier to work on. He felt that Panasonic probably had the best overall line with good models at various price points.
I still have my Dyson but it has gotten very noisy as if there's a bearing going out. I don't know if I'll get it fixed or not but I'll sure look at all the alternatives before making a decision.