Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

gluing damp wood

Posts

gluing damp wood

#1

gluing damp wood

les winter

>Over the winter one of my mahogony Adirondack chairs suffered some damage. Two pieces of the horizontal braces which support the vertical back pieces broke off. I'm going to glue these pieces back. It's long grain to long grain and the pieces fit together nicely.

The wood is a bit damp. I suppose I can wait for a series of hot dry days (not too common in New Jersey) or haul this thing into my shop or select an appropriate glue. Seems like Gorilla glue is correct for this.

I'd appreciate any suggests.

Thanks

Les

Re: gluing damp wood

#3

Re: gluing damp wood

Barry Irby

>I agree. I'm not a big fan of Gorilla Glue, but I use it on occasion and have done some significant bent wood lamination with it for outdoor products. (Redwood arches) I would use it for this. Tite Bond lll might work jsut as well if the wood is only damp.

Re: gluing damp wood

#4

Re: gluing damp wood

les winter

>Thanks guys. I went with Gorilla; the new type sets up quicker than the older stuff. Two hours later, it's a done deal.

I wish I could find a way to keep it from setting up in the bottle. Best I know is to squeeze the bottle until the air is out and glue starts emerging, then get the cap on tight. It sounds better than it works.

regards

les

Re: gluing damp wood

#5

Store it in the fridge. (I think)

Barry Irby

>

Re: gluing damp wood

#6

JL

Re: Dessicant...

JL

>I've had moderate success putting the container in a sealed quart can with silica gel dessicant. I suppose you could also put it in a glass jar with dessicant also.

Re: gluing damp wood

#7

Oh, Oh, another use for nitrogen!

Neal in San Jose

>