Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

OT--Fridge is dead....

Posts

OT--Fridge is dead....

#1

OT--Fridge is dead....

Martin from Granbury

>My 1993 era Amana appears to have lost its capacity to cool/freeze food. The fans still runs, the light still works, but it is not cool or cold.

I've got a guy coming to look at it tomorrow, but I am thinking that might be a waste of time.

So, can anyone recommend a good fridge? My wife is thinking she wants the type with the drawer freezer in the bottom. Is this a good idea?

Not sure where to shop, either...used to shop at Sears, but the last freezer I bought there is a piece of junk.

We have a Lowe's and Home Depot here, but no other big box type stores unless I drive to Ft. Worth, then delivery might become an issue.

Any suggestions on brands, shopping experiences appreciated.

Re: OT--Fridge is dead....

#2

Re: OT--Fridge is dead....

Dennis Yoder

>Don't buy the whirlpool, such a piece of dodo. The bottom freezer looks good to us. Dennis Y

Re: OT--Fridge is dead....

#3

Long time believer in bottom freezers.

Rod Peterson -- Ormond Beach

>We even had one in the '60s when I was growing up. Then with a series of apartments, a couple of houses with serviceable fridges already in place, and an almost utter lack of them on the market in the '70s and '80s, we weren't able to enjoy one until we put a new one in our condo in 1999. At one point, my daughter, my mother, and we all had the same model bottom freezer fridge—Amanas, as I recall. When we bought this house the Harvest Gold side-by-side had to go, for a variety of reasons, and we bought a stainless steel, bottom freezer Maytag (same as Amana, at the time, but less expensive).

Although the appliance market has changed, and you can't trust the old reliable names, in my opinion, we will never be without a bottom freezer model. My daughter bought a Lowes thing (don't remember the brand) when they bought the house in Jacksonville two years ago and it's a bottom freezer.

I believe you can't go wrong with one—it just seems more logical to have the door you open 95% of the time be the one at eye level, not thigh level. But, as Rita Mae Brown says, “if the world were a logical place, men would ride side saddle.”

Rod

Re: OT--Fridge is dead....

#4

Google it......

Mark Goodall - ATL - tooljunkie

>Last month our 1996 KitchenAid side-by-side decided that food only needed to be kept cool, not cold. It was barely colder than the kitchen but not as cold as normal/necessary. The temperature control knob had no effect of making it colder. I started thinking about replacing the fridge and decided to google it.

I found many hints and fixes for this sort of thing. After a few tries, including removing the dust on the coils, checking this sensor and that sensor, etc... I discovered that if I turned the temp.control all the way UP then all the way DOWN serveral times with a few minutes between each change..... well, viola it's working fine now. I wouldn't have ever foung that trick if it weren't for Google.

Happy Woodworking!

Re: OT--Fridge is dead....

#5

All Fridge Owners :

Pete in Holland, MI

>Those of us with fridges with the compressor & fan at the bottom, make sure to blow out all the dust from the coils under the fridge every couple years. They pick up all the floor dust & insulate the coils that are supposed to be exchanging heat, thus the efficency of the system drops and your cost of operation will climb, and the aging process on the compressor system accellerates !

Did mine with my air compressor last winter. Did a great job of cleaning out the dust, but only to distribute it all over the kitchen. Wife was NOT happy.

Re: OT--Fridge is dead....

#6

Ah-Ah-Ah-Achooooo!

Mark Goodall - ATL - tooljunkie

>

Re: OT--Fridge is dead....

#7

Re: OT--Fridge is dead....

paul in AZ

>Whatever you choose, avoid GE or one of it's sub-brands. Ask who builds whatever brand you are looking at.

I had a GE for about 3 years, and had circuit boards, sensors, etc etc replaced several times and it still swung wildly from being too warm to freezing everything and was very noisy. they finally told me that there was nothing more they could do. Forget customer "service". You never get to talk to a human until the repairman walks in the door.

One of their repairmen told me that in the last few years they have been using the cheapest possible components and that he wouldn't have one of the newer models in his house. GE saved money, Jack Welch got a humongous golden parachute and customers paid for it.

I gave up and replaced it with an LG which has been trouble free -and quiet- for a year now.

There are probably others out there that actually work.

Just NOT GE!

Re: OT--Fridge is dead....

#8

And we had two LG's die back to back. Who know's

Scott in Montana

>Bit the bullet and bought a Traulsen. A bit louder than the LG's, but a real piece of machinery.

Both LG's lasted about ten days and were on a dedicated circuit.

Scott

Re: OT--Fridge is dead....

#9

Re: OT--Fridge is dead....

Glenn Madsen, SF Bay Area

>What to buy? I'm not sure. Our ten year old Frigidaire is still more than serviceable.

Where to buy? We've bought the last several of our major appliances at Lowes. Better selection. Better warranties. Better stores. Better terms. We're waiting on a special order Bosch dishwasher for installation now.

For us, they are not the most convenient. The nearest one is 18 miles away, past at least 6 Home Depot stores in either direction. And Sears is no longer on the list, for all sorts of reasons.

But our experience has been really pretty good with Lowes.

Re: OT--Fridge is dead....

#10

My Grandmother's Philco lives on!

George@Colonel's Workshop-Havertown PA

>Good Morning Martin,

I remember when my Grandmother bought her new refrigerator, a Philco. It was 1948, and I was 9 years old then. I was there when it was delivered. Its now busy chilling beer for our third generation. There is no freezer designed into it. However, it will freeze if you turn the temp control all the way down.

When we broke up our old household to move, I was very concerned that we couldn't accommodate Nana's frige in our new little matchbox. My #1 son agreed to take it for use in his basement bar.

We currently have a top freezer, and it is an unkind design for those who have arthritis. Next time we'll get a bottom freezer. Brands? Now they are all of diminished quality----except the Philco, and I think we have the last of that breed.

George

Re: OT--Fridge is dead....

#11

Possible solution (Pics)

GolfSteve in Calgary

>If the fridge is still cool, but not cold enough no matter what you set the dial at then the defrost heater is probably broken and/or something is wrong with the defrost heater circuit.

Google this for info. It is an easy $35 fix.

To check for this problem, take the plastic molding off the inside of the freezer. That is probably where the cooling exchanger (evaporator) is located. In my case I just had to take the bottom panel off the freezer compartment. Of course to do this you have to take both doors off, then the front panel off, and then the freezer panel comes out.

Reminds me of my Volkswagen where I have to start taking the car apart in the back seat if I want to take the glovebox apart! (True!!)

If the exchanger is completely built-up with frost (like mine was) then it is no longer able to cool the fridge.

In my case the defrost heater ("radiant heater on the schematic") was a glass tube with a heating element inside it. The tube had broken and the element shorted out. $35 bucks later I was back in business. I also replaced the defrost thermostat at the same time just for the heck of it.

If your evaporator exchanger looks like this then the defrost circuit has a problem:


Once defrosted it should look like this. The broken radiant heater tube is shown in the foreground with the red ends and wires sticking out. PS BE CAREFUL when defrosting the exchanger. The plastic foam behind the plastic freezer panels appears to be very sensitive to heat. If you heat the walls of the freezer then little bubbles of foam will start to prodtrude through the plastic lining! I used a hair dryer to speed up the defrosting process and ended up with some bubbling before I noticed what was happening.


Schematic - radiant heater was broken; other likely problem is the defrost thermostat.


Re: OT--Fridge is dead....

#12

Re: Possible solution (Pics)

John-in-Abbotsford

>It's quite possible that the freezing coils are frozen solid with ice buildup, is it possible that you left one of the doors (fridge or freezer) slightly open for a number of hours or overnight. This has now happened twice to me over the course of 10 or so years ... the first time this happened the freezer stayed frozen but the lower part of the fridge no longer worked.

At the time I called a number of different service personel to take a look eack wanted money upfront to come out and have a look see apx $150 just for the call out,... then I came across one service fella that told me to unplug the fridge for 24 hrs to let the coils defrost and said my fridge will be fine , and should there be a problem afterwards to give him a call ... well as it turns out the fridge is still working great : )) why can't more service people simply play an honest game ... he will forever have my business from now on

John

Re: OT--Fridge is dead....

#13

Re: OT--Fridge is dead....

Howard Norman

>My previous fridge was a side by side. Always had trouble getting larger items in either the fridge or freezer side of the thing. When I sold the house the fridge went with the sale. This time I bought a bottom freezer model from Sears. I like the layout much better.

h

Re: OT--Fridge is dead....

#14

We have a winner....

Martin from Granbury

>Golfsteve,

You have pinpointed the problem, but the repairman, who just left, said the part would cost $150 plus installation and wouldn't be in until Monday or Tuesday.

I asked him about a new fridge, but he wouldn't name names. He said after they all went into circuit board mania, the reliability of all brands has gone way down. He said he has worked on brand new fridges, right out of the box!

I decided to go ahead and fix the one we have, for now. He said it was built better than any of the current models.

I'll fix it and see how long it lasts...

Re: OT--Fridge is dead....

#15

Re: We have a winner.... *LINK*

GolfSteve in Calgary

>I've bought parts from "Reliable Parts" a number of times...I see they have locations in the USA also and ship parts by mail/courier.

All my appliances are 15 years old and they are breaking down at the same time. In the last year I've fixed the fridge, dishwasher, and stove. In each case the repair parts costs less than $65 and the appliances are working like new again. It takes a bit of time to diagnose the problem, but I figger if its already broken, it probably won't hurt if I take it apart to see if something obvious is wrong that I can repair myself.

However, if springs are involved (such as on a dishwashwer jet-dry dispenser), I advise taking pictures of how the darn thing is assembled before you take it apart :-)


Reliable Appliance Parts

Re: OT--Fridge is dead....

#16

Recommendations (Long) *LINK*

John T

>I strongly recommend freezer on the bottom styles -

Much healthier for you, since the vegetable crisper will be right at hand, but you'll have to do some deep-knee-bends to get the ice cream.

Also supposed to be more energy efficient - hot air rises, so why put the coldest part of the refridgideezer on top??

We've had a Kenmore freezer on bottom(probably built by Whirlpool) for 10 years. Only problem that has come up with ours is freezing of the defrost coils. Ice cream compartment was plenty cold, but the beer compartment was warm. Turns out the cold air circulates from the coils in the (lower) freezer compartment to cool the upper compartment (fridge).

The link is to a great website that has saved my bacon on several occaisions, making me look like a home appliance repair super-stud to my wife. Very friendly folks that will walk you through diagnosis and repair. Links to Repairclinic.com, which is a great place to order parts (great website to help you find the part, cheap, and fast shipping. No affiliation - just a satisfied customer)..

I was able to diagnose and repair my fridge's problem (bad defrost thermostat) for about $30 and 15 minutes of work with a socket wrench, thanks to these guys.

Good luck!

-John-


Samuri Appliance Repair

Re: OT--Fridge is dead....

#17

Re: OT--Fridge is dead....

John in Calgary

>Hm, tried to post a response here yesterday, but I think it got shuffled off to moderator review because I forgot to put in an email address.

Anyways, take 2 - we bought an LG bottom freezer with french doors in January, so far so good. I definitely like being able to see our leftovers at eye level, its easier to take stock for the next night's supper.

I have found when the ice cube maker is making cubes and you are in and out of the freezer a lot, you get a light frost built up on everything. We fixed that by turning the cube maker off after the tray is full until it is empty as there is enough cubes in there to last us at least a month.

Lastly, don't waste your money on the the water dispenser in the door option - after the first cup or so, its no colder than tap temperature. I did a little research and found that they were having freezing problems with the original water reservoir (behind the left crisper, in case you want to see it for yourself) and just replaced it with a coil of tubing that is quite small in volume. So, for $250 extra, we get 2-3 cups a day of cold water, and the rest is just filtered tap water (good thing the ice bin is so big!).

Now I just need to get rid of the old top freezer Maytag that's taking up shop space - hm, anyone in Calgary want to trade a 6 year old top freezer fridge for a planer, maybe someone has an unused General taking up space that they want to get rid of?

John