Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Cabinet Saw Shipping & Receiving?

Posts

Cabinet Saw Shipping & Receiving?

#1

Cabinet Saw Shipping & Receiving?

Tony - Memphis

>I mentioned in a post below that I'm considering buying a cabinet saw (the Powermatic PM2000). I've either had all my large tools shipped to my old job (we had a dock and forklift) or I picked them up locally. I see that Woodcraft offers a liftgate option. I have a long drive (not really THAT long) and was wondering how you folks that have been through this have handled getting your saw (or whatever) into the shop. I am assuming they will lower the unit onto the steet/drive and it is on a pallet. I was considering buying a cheap pallet jack or seeing if I could even rent one. I'm a one man operation pretty much. I may could get one person to help. Thanks for any tips/ideas. I'm still on the fence about the purchase. My trusty old saw still works fine. I don't want to start the old contractor saw vs cabinet saw argument. This is 75% a want for me. I've been talking upgrading for years and I have saved up enough. I've used cabinet saws in some classes and really like how they drove!

Tony

Re: Cabinet Saw Shipping & Receiving?

#2

JL

Re: Cabinet Saw Shipping & Receiving?

JL

>They loaded mine on the back of my pickup truck at the dealer. I figured I could transport it less expensively than a truck with a liftgate option - besides, it gave me the option of shopping for more stuff :).

I didn't have a pallet jack, so I uncrated mine and removed the box of parts and the wing extensions. My two buddies and myself got it down off the back of my truck and put it on a sturdy hand truck. We trundled it around to the back of the house and into my basement.

I'd recommend preferably two more people to help. Three would make it safer and better. Most of the cabinet saws weigh quite a bit. The body with motor probably weighs in at over 300 lbs and it can be an awkward weight.

Re: Cabinet Saw Shipping & Receiving?

#3

no problem

Bill Tindall, E.TN

>I have screwed casters (3") to the crate and rolled it where ever it needs to go. I moved a 1100 pound lathe that way with ease. In fact my daughter rolled it into the shop.

Alternatively you can put 3- 3/4" pipes or dowels under it and push it along moving the trailing dowel/pipe as it rolls off to the front. Our huge planer was easily moved this way. Easy so long as you are on a hard floor.

The most clever was the 8" jointer that had to go downhill and across a lawn. It had snowed. We off-loaded it to a trap and pulled it across the snow with ease.

If you can borrow a low trailer that is the easiest hauler to get it off.

Re: Cabinet Saw Shipping & Receiving?

#4

Re: Cabinet Saw Shipping & Receiving?

Jim Moore

>I have the Jet 10" cabinet saw and the caster assembly that is made for it. I took the saw out of its crate at the store and we slide it in the back of my wife's minivan and took it home. Then I put the cabinet saw's moble base together. Next I just slide the saw slowly out the back and onto the mobie base. Then pushed it all into the shop. I may be a bit more ambitious than most as I typically find ways to do things by myself. A little grunting never hurts anyone as long as you use commonsense in your lifting techniques. I will say though, it was a challenge to keep that sucker from sliding too fast out the back of the van, but I did it without scratching the saw.

Re: Cabinet Saw Shipping & Receiving?

#5

BTDT x 2, YMMV

Neal in San Jose

>Been There, Done That twice. The first time was about 10 years ago when I bought a Jet cabinet saw. I paid for lift-gate delivery to my garage shop. The deliveryman was VERY helpful. He backed his truck up as close to the door as possible, dropped the saw down on the lift gate and together we slid it onto the concrete driveway. Then he helped me muscle the pallet close to the place it was to go in the garage. It was a lot easier than I thought it would be. I slipped him $10, and figured it was the best money I ever spent. Over the next hour or so I was able to remove the pallet from under the saw with a crow bar and a couple of 2x and 1x fulcrums.

I upgraded to a SawStop abut two years ago, and the process was essentially the same, but I slipped the driver $20. Inflation, you know! This time the driver hung around to see the saw, as he had delivered a couple and was very interested in the "can't cut your finger off if you try" feature. (His words, not mine). He was pretty disapointed that I wouldn't do the "hot dog demo" for him, but it went a lot faster getting the pallet out from under the saw with his help.

Bottom line - It seemed a lot more difficult that it has turned out to be for me. Your Milage My Vary!

Re: Cabinet Saw Shipping & Receiving?

#6

My Uni was dropped

Dustmaker Mike

>off in the driveway. The driver helped get it close to the door but would not help get it inside. I tried to give him a 20 but he said no. I spent the next hour or so unpacking the pallet and carring the parts I could into the garage. Wehn a neighbor got home from work he helped my hand truck the base into the garage. A month latter my two SIL help get it into the basement and set up. When I moved my brother and I moved it from the basement into the trailer then into my new house basement shop. Next move I am letting the mover move it. Did I tell ya it is Heavy!!! There not bad to unpack from the pallet. Or hand truck if you tack your time.

Re: Cabinet Saw Shipping & Receiving?

#7

Thanks!

Tony - Memphis

>Thanks for the tips. I'm going to have to be creative if I do this. I too end up doing most things myself. None of my friends live close by, so it would be hard to coordinate help. I moved the whole shop ten years ago, but I let the movers do it. The did ok. They dropped my jointer, but it was in nice soft grass, so it dodn't hurt a thing. I don't own anything as heavy as one of these cabinet saws. After getting it up the driveway from the street, I then have twenty feet of grass, a concrete stoop, and a threshold that is a few inches high. An obstacle course for tools! And I'll also have to figure out how to get rid of the old one. Geez, maybe I'll just keep it!

I'll let you know how it goes if I take the plunge.

Tony

Re: Cabinet Saw Shipping & Receiving?

#8

Re: Thanks!

John in Kerrville

>Moving it over grass is the real pain. I have a Uni and recently had to move it. I took the top off which helped a lot. Then used a furniture dolly out to the grass, then leaned it and went corner to corner until I got it behind the mini-van. SIL and I lifted in to the van and out again once I reached the destination.

Now I get to reverse the process in prep to sell it. Decided to go the hand-tool route. Too much noise and sawdust, and I am not going to build another dust collection system.

Re: Cabinet Saw Shipping & Receiving?

#9

Grass is easy use

Dustmaker Mike

>a sheet or two of old plywood. Or I have seen some folks use a heavy tarp, not the plastic ones the canvas ones. Good Luck