Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Transporting Finished Cabinet??

Posts

Transporting Finished Cabinet??

#1

Transporting Finished Cabinet??

Rick Jackson,TN

>I need to move a caninet I built for my youngest son and DIL to Cincinnati Friday this week. The weather here is west TN is iffy (rain) and though I hadn't looked real close, I would expect the same on and off on the way up. It is too large for the Honda CRV (24x28x60, pics to come when the glass goes in tonight) so I have to carry it in my Dodge P/U with an uncovered bed. How should I protect this cabinet from the elements?

Re: Transporting Finished Cabinet??

#2

Re: Transporting Finished Cabinet??

Sue McLam in Orange, VT

>Rick,

First of all, you'll need to keep it up off the bed of the pickup. Build or get a pallet that it can sit on. Next I would suggest wrapping it in shrink wrap. Then a good tarp wrapped all the way around it.

Sue, who has had to do this process too many times to count.

Re: Transporting Finished Cabinet??

#3

Ditto, and...

Grant Smith

>Sue is right on the money here, but I would also add that most of the tarps you buy these days are NOT waterproof. The blue and green cheapies are actually porous... just hold one up to the light and look at the pinholes.

So make sure you use a good tarp with maybe a layer of visqueen beneath it for good measure. Use the tarp to hold up to the road wind and the visqueen to keep water at bay.

Also, the shrink wrap is nice, but don't leave anything wrapped with it out in the sun (directly), as it seems to form little lenses which can cause sun damage.

You might also want to wrap the item in blankets first to prevent chaffing of the surfaces.

Regards,

Grant in Iowa

Re: Transporting Finished Cabinet??

#4

Re: Instead of all that effort... and...

Carol - now in NC Nebraska

>rent a small enclosed cargo trailer. Wrap it in moving quilts or old blankets. Lay it down so it can't tip over. Wedge it in place with cardboard, or more quilts. I had a trailer that hand places to attack straps. I used ratchet straps from HF.

The cost will be minimal, but you will be a happy camper, and it will arrive high and dry and as perfect as when you built it.

Oh, you said glass. If you can put off installing the glass until you get there, you will be even a happier camper.

Been there - done that - many, many times.

Re: Transporting Finished Cabinet??

#5

Re: Instead of all that effort... and...

John in Kerrville

>All of these are good suggestions, but how long since it was finished? I have seen finished furniture hauled all wrapped up and the material interacted with the fresh finish and...well you know the rest.

I worked in a professional cabinet shop and we stressed having the finishing done on the job, but the one time we didn't, we go to rebuild them at our expense. Just think about it.

john

Re: Transporting Finished Cabinet??

#6

Mattress Bags

Thomas Skaggs, Foothills of Mount Level

>Do you have any local mattress makers? Many places do. We have a couple here in town. I buy mattress bags from them to seal my work in for transport. They are heavy gauge bags and come large enough for king size beds down to twin beds. They are huge! One place sells me queen size bags for like $6 each I think.

Tom

Re: Transporting Finished Cabinet??

#7

Re: Instead of all that effort... and...

Rick Jackson,TN

>Thanks to all, I think I will pray to the weather gods and see if the forecast changes for the relatively short 6 hour drive. John, to answer your question, the finish (2 coats of General Finishes Black) was applied 2 weekends ago, and the semi-gloss was applied last Sunday. Regarding the glass I had intended to do nothing more than to check the fit and then remove it. I have glass clip screwed in the back of the doors. (Pictures soon) Thanks again to all who replied.

Re: Transporting Finished Cabinet??

#8

Re: Mattress Bags

Rick Jackson,TN

>great idea Tom though I doubt there are any here in the metropolis of Jackson,TN, maybe Memphis I will check. Thanks

Re: Transporting Finished Cabinet??

#9

The Cabinet in Question

Rick Jackson,TN

>Birch ply with poplar face frame etc. General Finishes Black with 2 coats of semi-gloss. I picked the glass up at the local stained glass shop. Brushed nickel legs, hinges and door pulls. Thanks for looking. Rick


img

Re: Transporting Finished Cabinet??

#10

Re: The Cabinet in Question

Bill Hammond, Oregon Coast

>Mattress bags, check your local mattress seller, may have a few left from new mattresses.

They make mattress covers that are waterproof. Check Target, Kmart places like that.

6 Hours, you will still need to protect it from the SUN and what ever comes up off the road or out of the sky (it's a bird, it's a plane, it's bird #$%&). Shrink Wrap prevents chaffing from a moving pad on the corners and edges but be sure it doesn't stick to the finish, waxing first may be a good idea.

Too bad shabby chic is not still in style, you could just chuck it in the truck and complete the finish on the trip......

Bill, on the Sunny Oregon Coast

Re: Transporting Finished Cabinet??

#11

Re: Mattress Bags

Thomas Skaggs, Foothills of Mount Level

>Also, check with local furniture stores that sell mattresses. Sometimes the delivery guys just cut open the ends of the bags on the mattresses they deliver and take the bags away. They might be able to hook you up too.

But check the yellow pages for mattress places. Those bags are great.

Good luck,

Tom