Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Invisible sound *LINK*

Posts

Invisible sound *LINK*

#1

Moses Yoder

Invisible sound *LINK*

Moses Yoder

>Okay, I am definitely behind the times. I like the fact that I have no desire to compete with the Jones'. I went to the K-BIS show in Chicago yesterday where I was constantly reminded of how far out of style I am. It felt great. A lot of neat things there. One of the booths was set up by "ONSIA" concealed sound solutions. They had a flat screen television running music videos off of a laptop with invisible surround sound built into the ceiling. The speakers are a flat panel about 24" x 24". To install them you cut a hole in the drywall and attach the speaker to the wall or ceiling then mud and paint or wallpaper or whatever right over the speaker. Looks just like the rest of your wall or ceiling. I checked out their website this morning and these speakers are being sold at Lowes for $149. This is not an off topic post; it applys directly to the kitchen remodel I am plan on attacking in the far future, and also if I was building a shop I would have this system installed. In fact I will probably add it to my existing shop at some point. They plan on adding a sub-woofer to the system in about 6 months.


ONSIA

Re: Invisible sound *LINK*

#2

Very cool Moses.... and a question

Tim Greif - West of Chicago

>LOML hates having to decorate around sound "stuff" like large speakers. This looks like just the solution. However, I'm just a teensy bit skeptical about how this sounds compared to conventional speakers. I build a set of Terry Cain's Dandylions from back in the Badger Pond days and love the sound. But they are rather large and consequently difficult to conceal. Am I going to be disappointed with the sound quality of this new concealed stuff?

Re: Invisible sound *LINK*

#3

Re: Very cool Moses.... and a question

Howard Norman

>I think that you would have some distortion but who am I to know for sure.

Re: Invisible sound *LINK*

#5

After 30 years in the A/V business... *LINK*

Scott in Montana

>I have yet to see one of these technologies succeed. I bet twenty or more companies have marketed such devices. They're novel when you first put them in, but after that, you might as well had a boom box. The only possible exception to this that I've seen and heard is a product from Solid Drive. These transducers operate from a different approach in that they attach to any solid surface and turn it into a resonator. Walls, doors, tables... etc. Most impressive might be their use on windows. They can actually get decent frequency response from a large window.

Their product is the byproduct of a failed military project (I refuse to go for the cheap laugh here). They are associated with several other very successful audio/video companies and have been in business for many years. I've read of lots of commercial establishments using their products.

Again, they don't sound as good as traditional speakers, but there certainly is a place in the market for this product.

I should mention that I have no connection nor financial incentive from this company.

I've listed their link below.

Scott


solid drive

Re: Invisible sound *LINK*

#6

Moses Yoder

Re: Very cool Moses.... and a question

Moses Yoder

>I would just send an e-mail if there is a contact on the website and see if there is a house near you where these were installed. I am not a music critic, and there was a lot of stuff going on at this show. But they sounded great to me. If I remember corectly they had 2 speakers built into a room about 10' x 10'.