A fluting/reeding jig PART 1 *LINK*
Alan Young
>I am building a writing desk that will have turned fluted legs. There are number of ways to "flute" turned columns. Below is a shot of a jig I am working on. The jig holds a turned column /leg while a router rides along the top cutting the fluted/reeded profile. I'll admit this thing is overkill- a perfectly satisfactory jig of similar function can easily and quickly be put together with plywood and drywall screws----But when I found a set of roller bearings and some 80 20 extrusion left over from a project at work I decided to put this together:
Below is a link with a number of pictures that show the jig put together. Next week I hope to have shots of the jig cutting the flutes..
Alan
A FLUTING JIG PART 1



