Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

How do you fold a pad of steel wool?

Posts

How do you fold a pad of steel wool?

#1

How do you fold a pad of steel wool?

Brian Hahn in SW Wisconsin

>I haven't used steel wool in decades, but recently I had a finishing problem where the best solution was to rub the finish out with steel wool. And I simply couldn't remember the "best" or "proper" way to fold a pad of steel wool. My book and magazine collection didn't help and I couldn't find anything in the WoodCentral archives or articles sections.

Could someone refresh my memory on how to fold a pad of steel wool?

Re: How do you fold a pad of steel wool?

#2

Re: How do you fold a pad of steel wool?

Clint Searl, at the base of Haycock Mtn

>Unroll it, cut in half lengthwise, fold each half to padding size.

Clint

Re: How do you fold a pad of steel wool?

#3

Re: How do you fold a pad of steel wool?

Brian Hahn in SW Wisconsin

>I've got a roll of Liberon steel wool, so that's not going to work too well. :))

There's a way to fold steel wool to easily get a fresh surface on the pad as you use it. That's what is eluding me at the moment.

Re: How do you fold a pad of steel wool?

#4

Re: Liberon

Dave Bair, Eaton Rapids, MI

>I use Liberon wool for my projects. I've never found a good way to get multiple surfaces from it. As you rub, the fibers compress and mingle together and you lose the seperate layers. Instead, I cut off about 8" and fold it twice. I can usually flip it over and get a second clean surface.

Re: How do you fold a pad of steel wool?

#5

grain direction

GolfSteve in Calgary

>A while ago one of the finishing experts (Sam Simpson?) said that when rubbing out a finish with steel wool you should rub against the grain of the wool to get a more even scratch pattern.

Never tried it myself so can't say if that's true or not.