Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

wooden signs

Posts

wooden signs

#1

wooden signs

John K Jordan

>Does anyone have experience with making large wood signs? I want to make one for a friend's vet practice to blend with the rustic look of the place. It will probably need to be 6-8' long.

This will be a roadside sign viewed from both sides. It must be highly visible even after years of weathering. It would be nice if it didn't have to be serviced too often.

I have a sawmill and considered cutting 2" or 3" slabs of e.r.cedar or white oak, hand chiseling or routing large letters, then painting the letters black. I'm wondering if the rest of the slab should have some finish applied which would hold up in the weather or if it would be better to let it go gray naturally. I've used marine varnish in the past for outdoor things.

I like the idea of using cedar since it holds up well to weather, seldom warps when drying, and is less weight to support than oak.

Any words of wisdom?

JKJ

Re: wooden signs

#2

Re: wooden signs

Rod Peterson -- Ormond Beach

>Norm did an episode of making wooden signs a couple of years ago, which included a visit to a professional sign shop in Vermont (or New Hampshire). What he demonstrated echoes what I saw at craft shows years ago—hardy outdoor type wood (your choice of cedar is probably just right), router based carving (V bit, with router used freehand on a tilt, and varying depth depending on typeface and where on a character you are), black paint for the letters, then sanding to assure a contrast by clearing the surface, followed by an appropriate finish. In those days, the craft show guys used mostly rattle cans of paint and finish.

The only thing I would recommend (after years of laughing at garage sale sign technology) is make the letters about three times larger than you think they should be for roadside visibility. I'd say 3-4" height is probably on the smallish side. The weight should be on the bold side, too.

Rod

Re: wooden signs

#3

One more thing…

Rod Peterson -- Ormond Beach

>The shop Norm visited also did some signage with rubber lettering on the wood, and the substrate then bead blasted for relief. The rubber was then removed and the relief and letters painted in contrasting colors.

Rod

Re: wooden signs

#4

Re: wooden signs

Chuck in ND

>I'll probably raise a few eyebrows in here for suggesting this, but, have you considered useing TREX ? They do make a gray colored board, and other colors you could use for lettering, I'm not sure how well paint would adhere to it, maybe a expoxy paint would be needed. Thats about as maintainance free as I can think of, but it would be heavy. Just a thought.

Re: wooden signs

#5

Re: wooden signs

Bri in Mtl

>I've made a couple. One the size you mentioned. I had a art or graphic art place make me a paper banner(you might be able to do this on your own computer). Traced the banner onto mdf templates, cut the template out and attached with double-sided tape, and then routed it out.

This was just painted pine. If you're painting it the pine should last quite a while.

Re: wooden signs

#6

Re: wooden signs

John K Jordan

>>...3-4" height is probably on the smallish side.

I agree. I've already mocked up a 3D model, two 8' planks totaling 24" high. The primary letters came to about 6" tall. The sign also has to follow county regulations which are not yet known.

Before I build it, I'll take a photo from the road and overlay the sign in the correct place and perspective and see how it looks. I might even put a full-scale paper version on poles to see how readable it is when driving by.

JKJ

Re: wooden signs

#7

Re: My neighbor bought a ShopBot

Glenn Madsen, SF Bay Area

>primarily to do signs, sort of a part time side business, until he retires full time. A 4'x8'. He's done some nice work so far on modest sized test pieces. He may have done some bigger work, too, that I haven't seen.

I really only know it's working if I happen to hear the cyclone blowing softly out the vents under the eves in the evening. Most of the work for him, now that he has the air clamps working, is at the computer.

There may be a 'Bot owner in your area...

Re: wooden signs

#8

Re: My neighbor bought a ShopBot

John K Jordan

>Thanks. I'm not really concerned about making the letters, only the choice of wood and finish so the sign will hold up to time and remain readable.

JKJ

Re: wooden signs

#9

Re: wooden signs... long

Gary Camp, Bend, Oregon

>Hi John A few years back I made sign to be placed along the highway leading to the ski area I work for. The sign blank itself was about 6 feet wide and about 4-1/2 feet tall by about 4" thick. I was given some guideline by the US Forset Service, but did the final design. There were a few mistakes, some mine and some were USFS. The wood is Port Orford Cedar, the letters were routed into the wood. The USFS wanted it left unfinished (no continuing maintenance was the objective) and they wanted the inside of the letters burned for contrast. It is still legible on the leeward side of the sign, on the weather side the Cedar has turned a wonderful silver gray, as intended, the burned letters faded to a not so wonderful gray. There is not nearly enough contrast, I don't believe black paint would have been any better. Second problem, I copied the letter size, height and width ratio from a white and green highway sign, that ratio looks fine with refelective white on green, but the letters are not bold enough for a routed wood sign. Third problem was again my own fault (lack of experience) I glued up three blanks, two with the wood running horizontal and one vertical, see where this is going? Anyway I glued everything together with poly glue, and one side got wet, when the individual panels blew apart it sounded like a cannon going off. I ended up repairing each seperate panel and through bolting the panels together with slotted holes. If I had any pictures I would post them, but right now the sign is half buried and I am off work for 4 days, I get to work on my own house for 4 days Yea

glc