Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Band saw movement

Posts

Band saw movement

#1

Band saw movement

JimG

>I recently bought an Iturra spring for my Powermatic 14" CS bandsaw w/riser. Now, when I lift the tension lever to set the tension, there is visible movement in the upper body, most noticeable at the upper bearing guides. Hard to say how much, 1/8" - 1/4". This is with a 1/2 in blade and the tension set to 1/2 (which I measured using a vernier caliper and seems to be about 15000), which I believe is about right. The saw works fine that way. But, I also bought a 3/4 in WoodSlicer. Now I am wondering if I should even try it, or if so not to tension to 3/4.

I'd appreciate any thoughts or sugesstions.

Thanks

jim

Re: Band saw movement

#2

Re: Band saw movement

Ray Binnicker

>Hey Jim,

I gave my 2 cents worth yesterday on another bandsaw question (some of it may apply to your situation). But, on your post; There is something about this "15,000" psi thing that I don't understand. It seems like an awful lot of tension. And, that much tension may causing your movement problem, which I don't think there should be any movement at any time. I use the "Woodslicer" blades sometime and really like them (I like the Timberwolf more). When I do use the Woodslicer I only adjust the tension to the size of the blade. What do you use the 3/4" blade for. I found a 3/4" blade on a saw the size of yours and mine is a bit of overkill. Someone else with a lot more knowledge on this may agree, but a blade that size may even be too much for these size saws. I have found the 1/2" blade will do all I need to do including re-sawing. My last 1 cent worth and I'll hush: Re-think that 15,000 psi thing and go back to the basics of the bandsaw.

Re-post and let us know if things get better.

Ray Binnicker

Re: Band saw movement

#3

Re: Band saw movement *LINK*

JimG

>Hi Ray,

Well, the 15000 is, I believe, the avg recommended psi for resawing. Besides, the tension gauge on the machine IS set at 1/2" now with a 1/2" blade and I get that movement (since I put in the Ittura spring). That is why I am wondering about using a 3/4". I was kinda wondering if this was normal.

The tension test I did with a digital vernier caliper. It just so happens that tightening the saw tension gauge to 1/2" setting with a 1/2" blade provided 15,000 psi.

It well could be that others that have used Iturra springs may experience the same thing, but w/o the benefit of a quick release would never notice it.

I need to resaw some 6' boards about 10" wide to get some 1/4 in wood for facing. I guess if I do go to the 3/4" for some resawing, I'll leave the tension at 1/2". I do have the WoodSlicer in 1/2 and 3/4.

jim


Tension article

Re: Band saw movement

#4

Re: Band saw movement

Ray Binnicker

>Wow! I would have never guessed there would be that much tension ! That movement still concerns me; as I'm sure it does you. I would hope someone else here would chime in and give another perspective. I know you're like a lot of us here, you'll work it out in your own way. Be careful, and do another post and let us know how it turned out.

Ray Binnicker