New Work, Collaborations
Thomas Skaggs, Foothills of Mount Level
>Hi everyone,
I have an art gallery show coming up soon and thought I'd share a couple of pieces here. I am doing this show with a couple of metalsmiths that I know.
Mark and Mindy Gardner have a historic forge about 30 miles away from me. Mark is a talented blacksmith and Mindy creates various nature themed art works by bending and chasing sheet steel.
I will have a number of pieces in the show that are my work alone. But we decided to do a couple of pieces as collaborations to help tie the show together.

This is a large table. It started out as a project that Mark was making for a client. After Mark had started making the base the client bailed out on the project. So Mark and Mindy called me to see if I would make a simple wood top for it so they could quickly finish it and be done with it. But when I measured it I began to feel that the top needed to be more than just a big panel of wood. So I designed the top that you see here.

So here is a detail of the top. It is essentially a group of interconnected steel hoops with wood panels and Morning Glory vines and flowers weaving through. The panels are birch ply with an oak burl veneer. Despite their simplicity, they were a challenge to make because while the hoops look round, they are each very much eccentric! So fitting each panel was a chore. The table is nearly 7 feet long.
My other collaboration was a wood bench. Mindy and Mark was hoping I would be willing to inlay some of Mindy's work into a project. She creates various nature things in steel so we decided that using fish would be fun.

So I came up with this bench. Turns out I had recently bought some nice walnut which included this slab. It was sliced from the side of the tree so it has a great range of colors as it graduates from heart wood to sap wood. The firgure I feel really evokes the idea of water. So the concept is that of a tranquil stream with fish.

To tie the metal and wood together I designed the steel edge and feet details for the base. The "fish tail" feet were made by Mark. The trough tenons were pinned with ebonized pins with curly maple details.

I inlaid the fish and adhered them with epoxy. This is a large bench that is 80" long and 20" wide at its widest place.
While neither project are exactly "my style" of work, it was interesting to tailor the designs to work with the metal art. As collaborators we all got along and I feel we enjoyed the process. Hopefully they will be a hit at the show.
Thanks for looking,
Tom




