Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Staining Poplar

Posts

Staining Poplar

#1

Staining Poplar

Larry

>What is the best way to stain poplar and get a good finish without blotches and get a nice look?

Re: Staining Poplar

#2

Paint it instead

Clint Searl, at the base of Haycock Mtn

>

Re: Staining Poplar

#3

Re: Staining Poplar *LINK*

Dan Donaldson

>This is stained poplar.


Stained Poplar

Re: Staining Poplar

#4

NM: Beautiful Work

Paul Leuba

>

Re: Staining Poplar

#5

Re: Staining Poplar

Kris Lasure

>If I'm going to stain a piece made from poplar, I pain stakingly find find enough lumber with consistent color throughout. I've had really good luck with water based dyes followed by shellac and your favorite finish. I've done a couple pieces years ago like this and the finish and them looks great.

Otherwise, as a couple others mentioned, paint it.

kl

Re: Staining Poplar

#6

3 coats of Zinssers Seal Coat shellac............

Art Silva

>will give you a moisture barrier of 87% on a scale of 100, and that will allow you to use a solvent based Gel Stain to make it look like any wood you want without any blotching. Put your Gel on with the grain with cloth, paper, foam or brush. Actually, any shellac will give you the same barrier affect, but de-waxed Seal Coat allows you to put anything over it. You don't have to sand the shellac.

Shellac has been a staple in the wooden boat business for ages, and the advent of Seal Coat has enhanced its use immensely. Good luck. Art

Re: Staining Poplar

#7

Re: Staining Poplar

Hal Smith

>What kind of stain did you use Dan; i.e., water based, oil based, dye?

If not dye, why shellac before the water based poly? TIA. Hal

Re: Staining Poplar

#8

Re: Staining Poplar

Dan Donaldson

>It was an oil stain. I used the shellac just to be sure that I had a surface that the water born poly would stick to.