Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Need Lathe Suggestions

Posts

Need Lathe Suggestions

#1

Need Lathe Suggestions

Jerry

>I'm just starting out and I need some suggestions concerning a new lathe. Specifically, horse power, voltage, and manufacturer. Any comments would be helpful.

Thanks,

Jerry

Re: Need Lathe Suggestions

#2

Re: Need Lathe Suggestions

Sean Troy

>I don't think you will go wrong getting a jet Mini to start with and learn on. In the future, when and if you decide you really like turning, you can get a larger lathe and keep the mini for the smaller things such as finials and collars, ornaments,bottle stoppers ect... it might be best to start with good tools, and chucks. Join your local turning club and ask lots of questions.

Re: Need Lathe Suggestions

#3

Re: Need Lathe Suggestions

Howard Norman

>I would suggest that you post your question on the turning forum here at Woodcentral. I bought a Jet 1236 many years ago before the mini lathes came to the market. Most people seem to start with a mini lathe these days.

Howard

Re: Need Lathe Suggestions

#4

Re: Need Lathe Suggestions

John K Jordan

>Yes, ask on the Turning board here.

For the most useful responses, think first about the kinds of things you would like to turn and put that in your message. To make 20" diameter bowls will take a different lathe than one for bottle stoppers or chair legs. The power needed will also depend somewhat on what you want to turn. Think also about your budget for both the lathe and the accessories. In general, you will need a set of cutting tools, a way to sharpen, and for the most flexibility, a good chuck.

JKJ

Re: Need Lathe Suggestions

#5

Re: Need Lathe Suggestions

Robin Corell in Atascadero, CA

>check out the turning forum and ask about a turning club near you. attend some meetings and ask the same question about a lathe there. there is often a member that has moved up and willing to sell a starter late but more important is finding a place to get some hands on instruction. a video is great once you know ther basics but for starting ot there is nothing that can replace a good hands on session.

Robin