Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Construction safety question

Posts

Construction safety question

#1

Construction safety question

Larry Marker

>Pardon what may be a pretty dumb question -- I'm an electrical engineer, not a mechanical or civil engineer.

I want to hang a 20 lb air hose reel from the ceiling in my basement. The joists are 2x10's on 16 in centers. The basement is 24 ft wide with a center beam, so the joists are 12 ft long. I want to hang the hose reel about 3 ft from the center beam.

Is it OK to drill holes through the joists to mount the reel? I'm talking about two 1/4 in holes about 8 in apart in two adjacent joists to bolt a plate to hold the reel. I assume it's better to drill near the top of the joists so the holes are in compression rather than near the bottom where they would be in tension.

Am I concerned over nits, or is this actually a bad idea?

Larry

Re: Construction safety question

#2

Re: Construction safety question

John K Jordan

>Electricians and plumbers routinely drill holes in floor and ceiling joists for cables, conduit, and pipes.

I don't have my reference book in front of me, but you can drill a 1/4 hole nearly anywhere on a joist. In general it is best to stay away from both the top and the bottom. The attached drawing illustrates where best to drill holes.

JKJ


img

Re: Construction safety question

#3

Re: Construction safety question

Larry Marker

>Excellent -- thanks for the drawing.

Larry

Re: Construction safety question

#4

Re: Construction safety question

Kevin Rabenaldt

>Remember also, you can attached additional wood to the joists with constructive adhensive or screws (you got screw holes!) and then attach something to that. 1/4 inch holes, as said, is so small, it does not affect the strength of the joist. The real problem is 3 inch or 6 inch holes in the wrong place that plumbers and HVAC subs do. If the joists are sized correctly, there is a good safety factor already built in. I sorry to admit as how much I hang from ceiling joists in my garage.

Kevin

Re: Construction safety question

#5

Re: Construction safety question

Larry Marker

>Thanks -- I know about the sister joists, but didn't think they would be necessary for small bolts. However, I haven't really studied wooden beams much and thought I'd seek some wisdom here.

I wound up using 5/16th bolts, but they are still small relative to the size of the beam.

Hose reel is mounted and life is good...

Larry