Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

New Woodturner

Posts

New Woodturner

#1

New Woodturner

JK

>Hello I am a new wood turner, I have been looking around for some ideas on what to make on my lathe, If anyones knows were I may find some good beginner projects feal free to answere.

Thanks!

Re: New Woodturner

#2

Re: New Woodturner

Pete in Holland, MI

>Welcome to turning !

Surf the "turning" message board for ideas and talk to those gents over there. These are flat-stock guys.

Re: New Woodturner

#3

Re: New Woodturner

Larry Clinton At Frankfort (Central)., Indiana

>I'm not much of a turner yet, but you will probably get a lot of ideas on the "Turning board" - This is a separate message board on this site that is devoted to turning (duh). Some of the top turners (and nicest people) in the US are on that board and I'm real sure they will be happy to welcome you their and give you a lot of ideas. To access the turning board just click on the "MESSAGEBOARDS" on the left side of the screen - then click "TURNING". By the way welcome to the site - This board is mainly bent toward those of us who do flat woodworking using (at least some) Power tools. Another board on the site is HANDTOOLS - That board is normally full of information on using non-tailed (no power cord) tools.

Re: New Woodturner

#4

Re: New Woodturner

John K Jordan

>Pete beat me to it - you might ask on the Turning side of WoodCentral. Think first about the kinds of things you might be interested in, bowls, ornaments, sailboat masts - the possibilities are unlimited. You might state your skill level to get appropriate suggestions.

Also, Mr. Google is your friend. Below are a few project and resource links.

http://www.squidoo.com/woodturningprojects

http://www.turnedtreasures.com/project.html/project_index.html

http://www.woodturningonline.com/Turning/Turning_projects.html

http://aroundthewoods.com/index.shtml

http://www.woodturns.com/resources/woodturning.htm

http://www.woodturningcenter.org/links.html

JKJ

Re: New Woodturner

#5

Gee, you haven't been warned?

Eddie Pacheco; San Jose, Ca.

>It's a steep, slippery slope you are venturing out on. For not only will you find great ideas and inspiration on the "TURNING" board. You will also find you need more accessories and cutting tools for those ideas to more easily come to fruition.

Welcome......

Re: New Woodturner

#6

Re: New Woodturner

Jim Dillon

>Welcome to WoodCentral! You also might want to check out the magazine Popular Woodworking for a monthly article by Judy Ditmer. She is a skilled turner and provides small turning projects with lots of pictures - which I like given my abysmal skill level using the lathe. There is an enormous amount of turning info out there in the form of catalogs, magazines, books, DVDs etc. If you have a good local bookstore, go in and spend some time just browsing the turning books to see what strikes your fancy. I'm sure you will find something that interests you and, as others have suggested, do check out the WC turning forum. Have fun and work safely.

Jim