Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Here is what the Easter Bunny brought me...

Posts

Here is what the Easter Bunny brought me...

#1

Here is what the Easter Bunny brought me...

Kris Lasure

>My Dad and I took a drive over to a new found sawmill on Saturday. The guy that runs the mill has been in business for several years, but I just recently found out about it. I found these cherry slabs sitting by his bandsaw and they were sawn last week. The three slabs in the middle are the best as the two on the ends are the top and bottom of the log. Each slab is 7' long and 2 3/4" thick. Right around 18"-20" wide at the widest point. No sapwood and maybe a couple of small tight knots. The color is very consistent all the way through. A great bargain as well.

I thought the curved grain of these pieces was very appealing and I had to have them when I spotted them.

Now the fun part is deciding what to build! What would you do with these?

kl


img

Re: Here is what the Easter Bunny brought me...

#2

Re: Here is what the Easter Bunny brought me...

Thomas Skaggs, Foothills of Mount Level

>They would make great bench seats. Make a curved back rail and use spindles for the backs.

Beuties all, but unfortunately you will lose some material if you mill them to straight boards. But curved things would be fun!

Tom

Re: Here is what the Easter Bunny brought me...

#3

Re: Here is what the Easter Bunny brought me...

George@Colonel's Workshop-Havertown PA

>Good Afternoon Kris,

My next project after the current double dresser wll be an elliptical drop leaf coffee table of cherry and birch/maple. Send me all the wood and I'll test it for you.

George

Re: Here is what the Easter Bunny brought me...

#4

Re: Here is what the Easter Bunny brought me...

Clay Foster

>Kris,

The curve of the boards have a graceful gesture. It would be a shame to cut them straight. Hang on to them until the appropriate idea presents itself. A hall table, a shelf, bench, or mantle might be a possibility. If they have the bark on the eddges, you might want to spray it with some Timbor to prevent powder post beetles or other xylophages from attacking it.

Re: Here is what the Easter Bunny brought me...

#5

Re: Here is what the Easter Bunny brought me...

tek-Brunswick, Ohio

>I assume if they were sawn last week that they have not been dried yet. First you need to figure out how to dry them to a stable level unless you use green wood building techniques. Do you build chairs? There would be some nice chair seats in those.

Re: Here is what the Easter Bunny brought me...

#6

Re: Here is what the Easter Bunny brought me...

Kris Lasure

>That's funny you mention chairs. I was at a buddy of mine's house doing some turning last night and he is building a rocking chair out of cherry for his wife. I got to telling him about the lumber I found over the weekend and it struck me as I was talking to him that some of this lumber would be perfect for a rocking chair. The curves in the wood would be perfectly suited for the rockers and the back. I could also possibly do something interesting with the seat.

Yeah, since it was sawn only last week it's gonna be a while before I do anything it. That and trying to find the time. I booked up with projects already throughout the rest of this year.

So I have plenty of time to come up with a design.

I'll post some pics in a couple of years. HA!

kl