Is it just me or does the guy that does all the work (I get them mixed up) seem to just throw sheet goods through his table saw? Sure looks like this is a kickback waiting to happen.
And....(since I'm semi-ranting), his "fast and furious" bandsawing also seems ripe to losing a digit (or two).
>are more entertainment than anything else. Yea, saw him " throw " stuff through both saws. Thing is SOMEBODY with no experience is going to try the same thing and get hurt REALLY bad. Also, I noticed, he makes REALLY bad stuff and REALLY bad humor. But then again its like most DIY shows . . . pretty girl in short shorts and a tank top with nothing but a hammer and a pair of pliers remodels a bathroom complete with plumbing and tile work in a weekend. LOML thought that was how it works 'till I made her help redo the bedroom. " No Honey, you have to let the first coat of paint dry. " " But it dries in a couple minutes on TV ! "
Dave Marks, Mike Holmes & Good 'Ol Norm ( and Tony Bourdain ) are about the only things worth coming in from the shop for.
>Where? When? What channel? All I see are Aussie guys with lots of bad body art using 2x4 "timbers" to make built-ins that require a gallon of filler and three coats of paint to be presentable. That's my rant.
>Yeah, there are not only going to be a lot of homeowners and house flippers injured, theres going to be ALOT of botched up homes on the market also. Isn't it just great, the tool companies profit from selling tools that get junkier by the day, and then try to put the real craftsmen out of work, by telling homeowners they can do it themselves. I'm not impressed at all.
Besides Norm Abrahm and David Marks I just can't watch any of the other DIY shows because they give me a headache. THEY WON'T HOLD STILL! The (handheld) camera is never on a shot for more than 3 seconds. And does EVERY shot have to ZOOOOOM in and out? They try to show us everything and they wind up showing us nothing! Sell the zoom lens and buy a tripod!
>In addition to running the wood through the band saw and table saw like it was a time trial, on a recent show he was performing a routing operation that one would normally expect to see done on a router table, but he just had a standard P-C router mounted in a vise, bit side up. And he was whipping the wood through that set-up like the shop was on fire and he had to finish in a hurry.