Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

new old planer

Posts

new old planer

#1

new old planer

jared

>Hello: I just got a hold of this planer a couple of days ago. I was wondering if anyone could help me out as to what company actually built it. the name plate says it is a sears craftsman but I am sure someone else actually built it. The blades are 12 inche wide, it does not have sealed bearings and I know that it is at least as old as the 50's. The original paint looks like Delta grey. The bed of the planer moves up and down rather than the head moving up and down. It is heavy I would guess 200-250 pounds without the motor or stand. I hope the picture I have attempted to attach comes through. Thanks Jared


img

Re: new old planer

#2

another view

jared

>Here is the other side of the machine. I might add the bearings appear to be tight and I know that it works, the blades just need to be sharpened. Jared


img

Re: new old planer

#3

Re: width of cut

Chuck W

>Jared,

What is the width of the cut? Maybe someone on owwm.com can help to identify the planer. Nice score by the way!

Re: new old planer

#4

Re: another view

tom norton

>It looks like a Parks. Check out Old Wood Working Machines .com

Re: new old planer

#5

Rick L

Re: Definitely a Parks!

Rick L

>

Re: new old planer

#6

Re: new old planer

Ray Binnicker

>Ditto on the "Parks". Great Find !!!!!

Ray Binnicker

Re: new old planer

#7

Re: width of cut and a nother question

jared

>width of cut is 12 inches. I also got a delta table saw of about the same vintage. It is smaller than the old unisaws but has a very heavy top, and it was mounted on a sheet metal table that looks like it is a factory made one, with provisions for a small jointer or something else to be mounted beside it and run off the same motor. The blade tilt mechanism is different, it goes 30 degrees each way rather than 45 one way. It needs a little work but is all there. I got both machines from the local lumberyard, they didnt want them anymore, liability issues I believe. Both had large boat anchor three phase motors that will be replaced, I have some used motors from another project. The planer has a heavy, homemade portable stand on wheels that by itself, easily weighs 4 times what my ryobi planer does. I gave $150 for the pair. I just have to get the planer blades sharpened and then get a jig to adjust them with.

Does anyone have an idea of how fast the cutter head should turn on a planer like this? Or what the feed speed will be if the machine is running at the right speed? Jared

Re: new old planer

#8

Made by Parks. I have a Parks just like it

Kneale Brownson enjoying snow in N. MI

>There should be a speed rating on the 3-phase motor's plate. Match the RPMs or get different pulleys to result in the same blade speed.

Re: new old planer

#9

Re: Made by Parks. I have a Parks just like it

jared

>any idea how old yours is? What little research I have done indicates that there are some with gearbox covers that are smooth and some have 3 humps on them. I imagine that indicates the age to a degree. Mine has the smooth gear box cover. Jared