Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Input on some 2nd hand jointers

Posts

Input on some 2nd hand jointers

#1

Input on some 2nd hand jointers

Dan Mitchell

>So after my fiasco with the "new" General, I'm once again looking at some used machines on Craig's list. I'm hoping the "old hands" here can look at three examples & give me an idea if they were good machines to start with & what a good price would be for each. They are as follows:

1) Delta 8" jointer, Single phase model 37-315. Made in USA? Doesn't say.

http://seattle.craigslist.org/kit/tls/614319483.html

2) Powermatic 60 8" Jointer. 1984 vintage, US made.

http://seattle.craigslist.org/see/tls/613510242.html

3) 8" Powermatic jointer w/extras. Mobile base, 16 years old. US I'm assuming.

http://seattle.craigslist.org/see/tls/613500466.html

Re: Input on some 2nd hand jointers

#2

Re: Input on some 2nd hand jointers

Moses Yoder in White Pigeon, MI

>I hope you are taking time out for Easter today with the family and thinking about all it means. I just did a quick search on the Delta jointer and the 37-315 seems to be discontinued but of the 3 jointers I think that one is the most for the money. If money is no object then I would go with the Powermatic but would stay away from the one that does not have any pictures that you can actually see. The Delta and Powermatic jointers are the two top home shop lines and you would do well with either one. Of course you would have to learn a little bit about how to set them up and use them depending on your experience.

Re: Input on some 2nd hand jointers

#3

Re: ps

Moses Yoder in White Pigeon, MI

>That Delta jointer I think retails for around $1800 new so it will not be there very long. If I had the cash right now I would go get it myself. Actually for that price I would check it out pretty good to make sure it doesn't have any serious problems.

Re: Input on some 2nd hand jointers

#4

Re: Input on some 2nd hand jointers

Al Stokka - Cambridge, Iowa

>Dan,

I agree with Moses about the Delta being the most machine for the money. I saw pictures of all three jointers. Perhaps the seller updated the lsiting?

In any case, I hope you noticed that the first Powermatic on your list ($1150) is 3-phase. Rather high cost to convert it to single phase.

Al

Re: Input on some 2nd hand jointers

#5

Re: Input on some 2nd hand jointers

Dan Mitchell

>Thanks for the replies. Al, I did not notice the 3 phase aspect, missed that in scanning the items, you're right that one's out.

If anyone has any suggestions on exactly what should be done to check out a used jointer, I'd like to hear them. Knife condition is pretty obvious & easily remedied if needs be. Flatness of the tables/fence can be checked with a straightedge, making sure they're co-planar may be more difficult.

Dan

Re: Input on some 2nd hand jointers

#6

Be more concerned about . . .

Henry Higginbotham

>. . . the planarity of the individual tables. If they're good, you can make the infeed/outfeed adjustments yourself. But if there's a cup or twist in either, you've got a big problem.

Re: Input on some 2nd hand jointers

#7

Re: Input on some 2nd hand jointers

Carol - now in NC Nebraska

>Make a pair of winding sticks.

They are simply two pieces of wood, exactly the same size. Say 3/4 x 1 x 12. They have to be the same width, in this case 1". Set one across the outfeed table and one across the infeed table on the 3/4" edge and parallel with one another. Then go to one end and sight across them. If the tables are warped you will see it immediately. The sticks will not match up with one another. One will appear higher than the other. If they are co-planer, which is what you want, you will see no difference between the winding sticks.

When hunting used iron, a straight edge, a pair of winding sticks and a magnet are the least of the tools to bring with you. The magnet sorts out iron from pot metal, aluminum, and other nonferrous metals.

Good luck.

Re: Input on some 2nd hand jointers

#8

Re: Input on some 2nd hand jointers

Dan Mitchell

>Thanks Henry & Carol. I see what you mean about the winding sticks. I have a 4' level I was thinking also would come in handy, since it will span quite a bit of the infeed & outfeed tables, indicating linear discrepancies between the 2.

One reason I'm so hesitant about buying a jointer is that I had a 6" Delta a few years back that came with a warped fence. Delta sent me a second, as warped as the 1st. Seems like whatever jointer you're considering, if you search enough, SOMEONE out there has gotten one with bum castings. I would really prefer an 8" & was leaning toward the Grizzly G0656 + G0686 8" models which seem like a lot of tool for the $$$, and despite the fact some swear by them, others seem to have had bad experiences.

So I keep going round and round from a relatively high-end 6" (like the 6" General) to a "value" 8" like the Grizzly, to an older used US made example.

Frustrating.

Dan