Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Mortising Machine - Another Question...

Posts

Mortising Machine - Another Question...

#1

Mortising Machine - Another Question...

Joe in a Cleveland suburb

>Hi folks.

Okay, so I went and bought a Steel City Mortising machine today.

I recalled reading the other day about buying some kind of bits for my Dremel to do something to the bits.

Not sure what that is or what it's all about. Can somebody explain please? Thanks!

BTW, this mortising machine went together without any issues. Seems to be a pretty nice machine.

Joe

Re: Mortising Machine - Another Question...

#2

Re: Mortising Machine - Another Question... *LINK*

Neal in San Jose

>Hope this works - here is a link to my previous message about using Cratex rubberized abrasives to polish the auger and sandpaper on a dowell to polish the inside of the hollow chisels. Bottom line, smooth up everything the wood is going to touch before, during and after the cut.


http://www.woodcentral.com/cgi-bin/messages3.pl?read=354027#

Re: Mortising Machine - Another Question...

#3

Re: Mortising Machine - Another Question...

Joe in a Cleveland suburb

>Thanks Neal!

I searched on eBay for the polishing/sanding things. I see a couple different products. Which specifically do you suggest?

I'm getting ready to build two different tables, this should help.

Thanks a ton.

Joe

Re: Mortising Machine - Another Question...

#5

Re: or Use diamond cone hones - $9 or so

North of the Border

>to do the job.

http://tinyurl.com/3753k9

Although I'm giving you a link to Lee Valley, you can find the same thing in Woodcraft, Rockler, eBay(?) etc.

By the way, when I bought my Delta mortising machine from Woodcraft, I could use the supplied chisel set (made in China) without any honing or sharpening out of the box. The cut was clean and easy. Please make sure the chisel is properly aligned for the cutting. The current issue of Woodsmith has a good article about mortising machine & maintenance of chisels, etc. - including the tip of spraying the chisel with lubricant during operation. Take a look.

Re: Mortising Machine - Another Question...

#6

Thank you.

Joe in a Cleveland suburb

>