Travel with tools
Doug Reynolds in Seattle
>I am flying to Marc Adams school from Seattle. What problems will I have with handtools in my checked luggage that will include things like chisels?
Knowledge You Can Build On — Est. 1998
Travel with tools
Doug Reynolds in Seattle
>I am flying to Marc Adams school from Seattle. What problems will I have with handtools in my checked luggage that will include things like chisels?
Re: Travel with tools
Lee Schierer - McKean, PA
>It should pose any problems as long as you check the bag. They will not let you carry those items on the plane in a carry on. Make sure your insurance will cover the loss of the tools as the airlines don't pay much if they lose a bag or something out of it. Just hope the TSA guy that inspects it isn't a wood worker. ;)
Lee
Re: Travel with tools
Carol - now in NC Nebraska
>I used to travel to do woodworking shows. I shipped my stuff via UPS or FedEx. No hassles with the airlines. It took one 'lost' router for me to learn this! Just get it out so it will arrive the day before you need it. I'll bet the school will accommodate that arrangement.
Also, airline luggage weight restrictions have been reduced. And their overweight charges are outright robbery. But when you are standing in front of the airline counter you have little choice but to pay them. I'd rather have that money available to buy new stuff I know I won't be able to live without as a result of having taken the class.
Be sure to pack some packing tape and labels for the return trip.
And have fun!
Re: Travel with tools
John Pappas
>Doug, I took some tools on a trip to Philly. Perhaps coincidence, or perhaps not, but out suitcase had been opened and inspected. They put a note in the suitcase to that effect. Otherwise, no problem.
Re: Travel with tools
Stew Pharis
>I agree with Carol. A few tools puts a bag at or over weight limits in no time. It's a lot cheaper to pay UPS than it is to pay airline overwieght charges. Several people shipped tools to the last Marc Adams class I took, so I know the school can accomodate you. Have fun in your class!
Re: Travel with tools
Grant Smith
>Doug,
I travel for a living with telecommunications installer tools. I use a rolling hardcase that goes unlocked, though I could put a TSA approved lock on it.
I have not had any troubles with the $2000+ worth of tech tools I carry on at least one trip per month. The case includes a socket set, various hand tools, Crimpers, strippers, heat gun, electrical and electronics test gear, etc. and I'd think if somoene would want to steal something, my kit would be a prime target.
The box has always collected a "Inspected by TSA" notice on each trip, and I haven't had anything missing yet. As far as I know, you can check almost any tool other than those with flammable liquids in them (like a chainsaw, for example). I wouldn't try to ship finishes, solvents, or similar items. If you are in doubt, look up the item at Amazon or a retailer and see if it can be air shipped...better yet ask your airline. Chisels and knives are OK in checked baggage...even unloaded, declared firearms are OK.
You can usually check two personal bags...a tool bag and then a bag for clothes, for example and still have a carry on with laptop, change of clothes, etc.
Some airlines now charge for the second checked bag, so check with your airline before flying. Most times, you can have up to 50 lbs in each checked bag.
FWIW,
Grant in Iowa<----flyin fool
Re: Travel with tools
Clay Foster
>You won't have any trouble with chisels in your checked luggage. I fly all the time with a toolbox full of turning tools. Security people usually open it and leave a note saying they looked in my tool box. Don't lock your bag, or they will break the lock if they want to look in it.
Spoilsport . . .
steve mackay
>and rabid cynic that I am . . . if it were my tools I'd FED-EX 'em. They were to hard to earn and to dear to me. I've heard a lot of travelers going this route even for normal bags.
Re: Travel with tools
Pete in Holland, MI
>I travel for work some times. Any tool will be collected. Had Allen & Cresent wrenches removed from my carry-ons one time.
I remember back before 9-11 that I came back from Germany with a full set of mortising chisels in my carry-on with no questions asked. Ahhh......the good ole days.