Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Dual drum vs. open ended sanders

Posts

Dual drum vs. open ended sanders

#1

Dual drum vs. open ended sanders

Ken Miller

>Could someone please explain to me the difference between the two in terms of the jobs that they can perform (besides from the fact that the capacity might be greater with the open ended sander.) I have read other posts and have heard so many good things about the jet/performax and I have also read about dual drum sanders and the ability to put two different abbrasives on at once. But is there anything that one can do that the other can't? Is there anything that one excels at that the other doesn't? The two models I have considered are the 16-32 and a 16" dual drum from grizzly. I don't see myself having a need to do more than 16", though it is nice to know that I could if I had to. My work might include cabinet doors (along with their panels if they are resawn), cutting boards, parts for boxes (again including resawn pieces.) Finally, I haven't really read any opinions about the grizzly sander. Any feedback on them, in particular the 16" model to stay within my budget. Thanks for any feedback.

Re: Dual drum vs. open ended sanders

#2

Re: Dual drum vs. open ended sanders

Barry Irby

>I have a 16/32 American made Performax from the era before they were sold to Jet. I like it. 99% of what I have used it for would have run through a closed end machine. On the few occasions I used the open end feature, it was important at that moment, even though I have a friend that has a 36" belt sander. (PITA to go use it.)

I Looked at the closed end machines made by the same people that used to be Performax. (They sold the name and only the open end design) The machines looked good and may address some of the issues I have with my machine. Mainly, it is slow. SLOW, Really SLOW! If the dual drums work as well as they appear they would, it could cut the time in half. I'm not sure though, because I have never used a dual drum machine and I am a little skeptical. I have to run stuff through mine several times at each grit to get the results I want, but with more horsepower it might be possible.