Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Getting new saw in the shop?

Posts

Getting new saw in the shop?

#1

Getting new saw in the shop?

RickS

>OK. So I'm convinced that the SawStop saw is the one for me. My problem is this is a basement shop with only the inside stairs to go down. (Why didn't I spring for the bilco doors when the house was built?). From what I've read so far the saw is a single 675 pound unit that would have to go down the stairs. Most other cabinet saws come in at around 4 or 5 hundered puonds total but I figure that a good bit of that weight is in accessories like cast iron wings and such that bring the single unit weight down to a more manageable 300 pounds. Just how much is the single unit weight of the SawStop saw? How have others done this (besides those of you that own a gorilla)?.

Re: Getting new saw in the shop?

#2

Re: Getting new saw in the shop?

Thomas S Stockton

>Rick

I think the worst thing you can do is dismantle the thing, to many adjustment to go wrong. When I had a unisaw I could move it with the fences and auxilery tables off of it with a good hand truck by my self so it isn't impossible. One thing I've done is to attach a pair of skids to the stairs and slide it down, I used a chain hoist to control it and it worked well I did have a helper. Another option would be to find someone with one of the handtrucks that climb stairs they are popular with woodstove installers and dealers so start there.

Most important is to be safe and don't harm the tool.

Tom

Re: Getting new saw in the shop?

#3

Re: Call SawStop

Dave Mount

>The extension tables and fence are all that arrives separate from the main unit. Those are not inconsequential in weight, but there's still a lot of mass in the main unit. But it's comparable in weight to a refrigerator and they make dollies to handle those, so I would think you could manage things fine with the right equipment and a couple strong backs.

If you just call SawStop, I'm sure they could tell you the weight and whether there's anything that could be stripped off of it -- I kind of doubt it, but I don't know that.

It's worth the trouble, you will like the saw a lot -- I replaced my Unisaw with one and have no regrets.

Best,

Dave

Re: Getting new saw in the shop?

#4

Re: Getting new saw in the shop?

Jay St. Peter - Southern, MD

>I removed the top and was able to take the base/motor of my Unisaw down with a simple hand truck. There seems to be a lot of paranoia about taking the top off a TS. It was a piece of cake and I don't really understand the big deal. The top itself weighs around 100lbs. If I do the same to get it back out, I'll probably need help or have to remove the motor also. It wasn't hard to get down, but judging by the ease of getting my 6" jointer in compared to out I know gravity was assisting me.

While moving make sure you block the motor in place (or leave the shipping packing) so it doesn't bounce around on the trunnion and possibly crack it. Also, accurately measure from one side of the throat plate to the blade so you can get the top centered correctly (I set a combo square before removing the top and left it set). When disassembling, be careful to gather the sims and ensure they are replaced exactly as they were while reassembling. That's it.

Jay

Re: Getting new saw in the shop?

#5

Re: Stairclimbers

Gary Camp, Bend, Oregon

>Our local Pepsi dealer has a set as does the local vending machine company. I have never tried the local rental yards, but since we are a very good customer of Pepsi they have loaned me their climbing handtruck in the past. I used one to move an ATM up a very long flight of stairs with an intermediate landing. I worked very well. I'd probablly use use skids on the back of the saw, plywood on the stairs and a com-a-long to control the speed of descent.

glc

Re: Getting new saw in the shop?

#6

Re: Stairclimbers

RickS

>Thanks for the responses. I like the stairclimber idea. I'm going to check around and see if I can rent one.

Re: Getting new saw in the shop?

#7

Re: Getting new saw in the shop?

Dan Mitchell

>"I removed the top and was able to take the base/motor of my Unisaw down with a simple hand truck. There seems to be a lot of paranoia about taking the top off a TS. It was a piece of cake and I don't really understand the big deal."

I had a similar experience with a Unisaw. Even without removing the top, you should check its alignment anyway once the machine's in place & adjust as needed. I also removed the motor from the Unisaw, don't know about the added complexity on a sawstop, but on the Uni I found it a very heavy & easily removed/replaced bit.

Dan