Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Brushes to seal a contractor-style saw - long

Posts

Brushes to seal a contractor-style saw - long

#1

Brushes to seal a contractor-style saw - long

Al Stokka - Cambridge, Iowa

>Recently, someone (my poor memory suggests Barry Irby, but I could be wrong) inquired about the brush-like mud flaps on an over-the-road UPS truck with the idea that the brushes might be useful for sealing the back side of a contractors saw for improved dust collection. As I recall, there weren't many, if any, responses. Well, today, quite by accident, I stumbled upon a possible source. The March 6, 2008 edition of Machine Design magazine (www.machinedesign.com, 866-505-7173) contains an advertisement from Sealeze (www.sealeze.com, 800-787-7325), a company which makes stock and custom brush (for lack of a better descriptor) strips. I called Sealeze to inquire about their selling to individuals. Indeed they do sell to individuals. So, flying by the seat of my pants (not having my saw in front of me) I described the proposed application to Kay (unexpectedly helpful and friendly), the lady who answered the phone, and together we settled on a possible product.

Sealeze's "section G" is a series of .035 diameter (lightly under 1/32", for those of you in Rio Linda...) nylon filaments bent over a galvanized steel wire and crimped in a galvanized steel sheet metal channel. The section G brush is .350" thick (slightly under 3/8" for those of you�) and, as Kay and I decided, should be priced with a 5" filament exposure ("exposure" is Sealeze's term for the length of filament which is exposed beyond the channel). The company stocks this particular section (as well as other filament diameters, exposures, and brush thicknesses) in eight-foot lengths, which makes them shippable via UPS. They will also cut to custom lengths, though I didn't ask about cutting charges since I, and most folks on Wood Central, would prefer to cut their own. An eight-foot piece of section G is priced at $107.52. Sounds like a lot, I know, but consider that the back side of two contractors saws could be outfitted using one eight-foot strip, or nearly so.

You're probably way ahead of me at this point (or, lost interest after I mentioned the cost and quit reading) and thinking, "I could drill a few holes in that steel channel, run in a few screws, and have the brushes mounted in no time!" Not so fast�drilling through the channel will sever the wire and/or bristles and next thing you know you'll have nylon bristles falling to the floor. "A useless idea then, Al", you say? Nope, Sealeze has this figured out. They make (and sell, of course) an extruded aluminum holder, which you can drill to your heart's desire. The brush slides into this channel for mounting. Price of an eight-foot section of aluminum holder? $30.72.

So, if you're still interested after this long-winded message, think about giving Kay a call. As I mentioned, Sealeze makes and stocks other sizes (thickness, filament diameter, filament length and, I suspect, though did not ask, filament material) so don't feel obligated to use the size I picked.

Lastly, Kay offered to send a sample to me. I'm sure she would make you the same offer and, if you genuinely interested, ask for it. But, if you're merely curious or looking for a free brush, please ignore the impulse. Too many free samples without subsequent sales will just drive up the price for those folks who need or want this solution to dust collection.

Al

Re: Brushes to seal a contractor-style saw - long

#2

Re: Brushes to seal a contractor-style saw - long

Barry Irby

>Al, you are right, it was me. Thanks for finding them. I did not have as much as you did. These seen like a good idea, but way more expensive than I thought.

I did contact a company that makes those brushes on ice scrapers. They are about six inches long and have about two inch bristles. They were very nice and actually sent me about a dozen for "evaluation". Free.

I epoxied some of them under the throat plate to encourage the dust to go into the chute I made. Works great. OTOH, my approach of making a chute up around the blade has reduced the airflow dramatically. It might be better to use one of the trays under the blade and suck huge air flow through the saw to capture the fines that mine might be allowing to escape. This is where the brushes you found might pay off. A physical barrier that would retrain the chips from flying away, but allowing air flow toward the chute.

Just thinking against the wind, Thanks.

Re: Brushes to seal a contractor-style saw - long

#3

Re: Where to buy them

Brian in Brighton

>Al, You can buy these from McMaster-Carr, part number 74405T21. www.mcmaster.com These work great, make sure you get the mounting strips or get the kind that have a built in mount. They can be bought by the foot and then you will need to modify it. There are several different mounting rails.

Also. I own a company that makes automation equipment and I would discourage people from calling manufacturers and asking for samples. They usually send them out to possible future buyers, like me. If too many people keep asking for samples and not buying it makes it a lot harder for those of us who will buy to get a legitimate sample. How to get around this is to create a "kit" to add into contractors saws that will allow people to modify their saw and put this to work for you. Maybe someone from Rockler will read this and get with you to make blue ones for sale! Hint Hint Hint.

Brian in Brighton

Re: Brushes to seal a contractor-style saw - long

#4

an easier supplier would be.....

Scott in Eastern Iowa

>.....your local commercial contractor type door and hardware supplier.

They to sell these as "door sweeps" (I think) as an option to buy with the doors.

Re: Brushes to seal a contractor-style saw - long

#5

Re: Where to buy them

Barry Irby

>Brian,

This is interesting. As I recall, last time I posted this, It got very little response. Thanks for the suggestion about McMaster Carr.

In my effort to find brushes I called trailer manufacturers and asked where they bought the brushes. They promised to get back to me but never did. I called the company that made the ice scrapers that had the little "snow" brushes on them and told them what I was looking for. They sent me some. Again, as I recall they either made them or bought them in huge quantities. There was no effort on my part to suggest that I was a future customer. They were just being helpful and nice. Perhaps it was a break in the monotony of their day.

I do like your idea that if someone tried this and it worked, that it might represent a new "kit". Of, course that would require some experimentation to prove the concept. I was just brainstorming as they used to say. Not exactly thinking Outside the Box, but thinking of how to enclose the box.

Re: Brushes to seal a contractor-style saw - long

#6

Re: Where to buy them

Chuck in ND

>May I suggest that you should block off the gap between the cast iron top and the cabinet, and also the slot in the front of the cabinet where the bevel indicator is. Then all the air needed to supply the DC comes from the back of the saw, reduceing the chance of the fine dust from geting out.

Re: Brushes to seal a contractor-style saw - long

#7

Re: Where to buy them

Chuck in ND

>I'll add one more thing. Those generic plastic dust hoods under the saw are junk.

Re: Brushes to seal a contractor-style saw - long

#8

Re: A couple of things

Gary Camp, Bend, Oregon

>First, check with the local truck repair / accesory shops, I can get trailer brush at more than on establishment here in Bend, not a huge selection, but it is availble, and bend is really pretty small, 75 thousand.

Second, a few years ago I had a less than pleasant experience with Sealeze. It may have just been the salesperson or it may have been the way the company did buisness. Here is what happened. I purchased engough of a variety of there products to weatherstrip about 25 doors. I bought more than a $1000.00 worth of product (I don't remembr how much more). Sealeze shipped more product than I ordered, a couple hundred bucks worthas I recall. They wanted me to pay for it, or ship it back at my own expense. The time, packaging and expense of the shipping were more costly than the product, so of course I didn't want to ship it back. likewise I didn't order it either, so I didn't want to pay for it. Finally they waived the addtional charges, but not without several phone conversations. It always felt to me like is was not an accident. This is just my opinion and it happened several years ago, I hope I didn't overstep any boundaries here. The products them selves were very good.

Re: Brushes to seal a contractor-style saw - long

#9

Re: Brushes to seal a contractor-style saw - long

Dennis Yoder

>The Camping world catalog came to day and it has 2 different styles that might work. One is a series of rubber strips that fit under the vehicle for 79 to 85. Also the string or brushes for 55 to 65.They can be found at the local store of on the web at campingworld.com.

Dennis Y