Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

On/Off switch source

Posts

On/Off switch source

#1

On/Off switch source

Mac in Indy

>I'm building a new router table and would like an on/off switch like most of my other big tools. They are Delta's and I believe people refer to them as magnetic switches. Where can I get one? Ichecked in the grainger book and at the local electrical warehouse with no luck.

Thanks

Mac

Re: On/Off switch source

#2

Re: On/Off switch source____*PICs*

Rod Peterson -- Ormond Beach

>Hi Mac,

For a router table do you really need a magnetic switch? Here is the typical Delta non-magnetic switch as mounted on my drill press (I have the same switch on my bandsaw and my jointer, and one used to be on my planer):




This is the magnetic switch that came with my Unisaw:




I bought a second one on ebay some time ago, and replaced the above on my DC380 planer with this. The heaters that came with it are for a 3HP motor, which is perfect for the planer. It doesn't seem to me that one would need this much beef with a router table. In fact, I mounted a spare Delta (obtained at the same time as the mag switch) onto my router table and it works just fine. Unfortunately, as you probably already found out, Delta is really proud of their switches, which pretty much moves them out of the realm of the hobbyist machine builder.

Fortunately, however, Grizzly now markets one that appears identical at a more than fair price:




To further sweeten the pot, they have one with a big stop paddle for virtually the same price:




I'll bet one of them would serve your needs just fine.

Rod

Re: On/Off switch source

#3

What's the difference....

Terry Alexander

>...in a magnetic switch and a non-magnetic switch.

Sorry to be so dense.....just curious more than anything.

As always....TIA

Terry Alexander

Re: On/Off switch source

#4

Re: What's the difference....

Paul Woolson

>If power goes out while the tool is operating, a magnetic switch will "kill". That way, if the power comes back on it won't send the work piece flying into your face.

For that reason, I'd think a magnetic switch would be quite necessary for a router table.

Re: On/Off switch source

#5

Re: On/Off switch source *LINK*

Ken Garlock, Collin County Texas

>Hi Mac.

I bought my mag switch for my router table at Grizzly. They have a reasonably good selection....

Happy routing,

Ken


Grizz mag switch

Re: On/Off switch source

#6

Oh Rod.....something for you

KurK in Indy

>Hello Rod, I don't have time to find Joe's pertinents so I'm sure you'll be able to get this to the woodbutcher. I found the source for the wall mounted clamping center I built years ago. It can be found in the ShopNotes magazine volume 11 issue #62 (see it pays to save all of those old magazines, at least that's what I tell SWMBO)

I hope he can track an old issue down. I know they still publish the thing cause they still send me renewal notices. I believe that August still publishes it.

Good luck.

Kurt....who is still alive and cutting in Indy!!

BTW...have I missed any announcements for this years IndyFest?? Have missed it due to work committments the last 2 years.

Re: On/Off switch source

#7

Hey Kurt! *LINK*

Jennifer@Indy.USA

>No Indy Fest announcements but we are all hauling over to Frank Miller in April.

Jen :)


Go Here for Details