Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Care for Mangrove wood carving

Posts

Care for Mangrove wood carving

#1

Care for Mangrove wood carving

Keith Melcher

>Does anyone have any recommendations on carign for a mangrove wood carving. I have acquired a very ornate wood carving that I got in Malaysia. It was carved by a traditional wood worer in the jungle so lots of humidity and high temperature. Anyone have any recommendations on how I should take care of this in my low humidity cool apartment. I very much want to avoid any possibly checkign or cracking.

Re: Care for Mangrove wood carving

#2

Lee Grindinger

Not a good prognosis

Lee Grindinger

>Sadly, it is very rare that tropical woods don't shrink and split when moved to much drier climates. There is a little you can do that might help, however.

First, look for the pith. If the carving is made from a piece that contains the pith it's pretty much doomed to check, the shrinkage will demand it unless you want to go to the trouble of PEG, not a good option for a carving.

But, if there is no pith place the carving in a bag such as a paper grocery bag and cover it with dry cleaning film or something that will restrict the loss of moisture, dry it very slowly, like to the tune of a year or more. If checking begins it's not going to stop because this means the wood tissue is fractured, it may already be.

Good luck with it but begin prepping yourself for accepting a split or two and still regarding the carving as beautiful. It's not impossible but the odds are not good.

Lee