Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

MM FS30/a little rant/Josh in VA read this

Posts

MM FS30/a little rant/Josh in VA read this

#1

MM FS30/a little rant/Josh in VA read this

HC Sakman

>Hi Everybody,

I bought a Minimax FS30 with Shelix, which is installed by the authorized SCM dealer. It costed me just shy of $7000 Cdn. inc. shipping, taxes etc.

After installing the new cutterhead, I guess something is overlooked and the tables were not coplaner. It was cutting convex edge, which means both tables are sloped towards the center. I was on the phone with the tech-guy, trying to adjust the tables, which turned out to be a 3 day affair with worse outcome than where I began. After begging them to come and fix it, a week later (while wasting my work days when I am up to my eyeballs with work!) they managed to send somebody around 5pm, as he came to my place after he set-up another machine up island. Around 9pm the job was done. He went to his hotel and then he took the ferry to go back to Vancouver. His name was Phil and he was a nice guy and he made me feel good by doing the job in 3~4 hours as it's a frustrating affair since there's no solid reference surface to set the tables. Once set though, it's a well aged design of many decades that it's proven to work well. So I am not worried about this problem reoccuring anytime soon. It planes down to >1/8" flawlessly and change over is quick. Oh, also the fence was bulging in the middle, so they send me a new one, which took 4~5 days. So far so good.

Then I received a bill for almost $500. $150 for fence shipping, the rest was for the tech guy's hotel and meal expenses + his hourly rate. I phoned Euro-Tech services, thinking it was a mistake, but it wasn't. I told them that my service (actually warranty) work was squeezed in, he didn't take the trip especially for me. The lady on the phone (Barbara) told me that the fence came all the way from Italy, blah, blah... I said I don't charge extra (especially if it's a material failure) for bubinga that comes all the way from Africa! That cost is already absorbed by the "cost of doing business". You can't charge me (inflated) for the shipping of a replacement spare part. (It was aluminium, so the package was light.) She says she paid shipping for her satellite box...etc... just pointless boring arguments that wear me out. Finally she settled in with "company policy" to convince me.

When I was talking to the salesman Kevin, I told him that I am rather inclined to buy it from Minimax USAfor 40% cheaper price or Grizzly for 1/3 the price. He told me about the parts and service convenience as MinimaxUSA will not serve to Canada. So I bought it. I gave them $3000 back in OCTOBER as a non-refundable deposit. (Why non-refundable is another question, because they have this machine in stock by the dozens, if not hundreds.)

Now, she was also telling me that their most experienced tech did the cutterhead change and try to put the blame on shipping damage, etc. They were not accepting their mistake of sending me a machine that was not adjusted/tuned-up properly. Finally she had reached the consensus of "Company policy" to settle this argument. I said I don't care about your policy, because it's a brand new machnine that costed me 7 grand and I expect it to work properly, it doesn't. Making it work properly is your duty and responsability and can not charge me to fix your mistake of overlooking the alignment of the machine before it left your store/shop.

They finally said fine, don't pay anything. A week after this 30 min. phone argument (conversation!) I received a bill for $150, but this time I am not going to bother phoning and get an earful of more company policies! They should actually have one blanket company policy to cover all: "Customers must bendover without asking any questiions!" Sorry to be rude but they really annoyed the crap out of me.

The line made me snap was this: "You bought the bottom of the line unit!" This was said as a justification why it was out of alignment. Damn thing is still $7000, and the top model is $10500. Big deal! Oh! I was furious, she changed her tune really fast about the "bottom of the line" BS!

What the hell is "company policy" anyway? They talk about it as if it's a constitutional amendment! Anyway, they're so over.

So Josh, Grizzly is the EXACT copy of this machine and if it comes out of alignment...good luck. Grizzly won't sent back anybody to fix it. Funny enough I was going to buy from Grizzly initially, but they said -back in October- it'd be available about now, in March. Ironically, I received my machine just a few weeks ago. If it arrives tuned, it's nice machine indeed. Though, I should have got the Felder instead. If you have the space, I'd buy seperate machines. 66" bed length is little short for anything longer than 5 feet to get an accurate edge. I am still keeping my 12" Makita lunchbox and 14" General w/ Shelix head.

Rant is OFF.

Chico...