round over router bits
Paul Waddle
>Can one buy round over router bits with a 1/16 radius that comes to a point(no pilot). I ask dremel,but they said no. I can use a small bit or one ground on a 1/4" shank. Anybody PLEASE. thks,pw
Knowledge You Can Build On — Est. 1998
round over router bits
Paul Waddle
>Can one buy round over router bits with a 1/16 radius that comes to a point(no pilot). I ask dremel,but they said no. I can use a small bit or one ground on a 1/4" shank. Anybody PLEASE. thks,pw
Veining bits *LINK*
Mark Goodall - ATL - tooljunkie
>I have one like this, but a little bit pointier. This is a CMT, but I think mine's a Freud, but i don't see it on their online catalog. Perhaps it's another brand.
Happy Woodworking!
http://www.cheyennesales.com/catalog/cmtpanv.htm
Re: round over router bits *LINK*
pecker
>Look at the first item on this page at the link below............
#P13-2307
http://pricecutter.com/plunge-cutting-decorative-b
Freud's Offering *LINK*
Charles M
>Mark,
Here's the Freud version.
Charles M
Freud America, Inc
Beading Bit In Beadboard Set