Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

OT - Power window problem on van

Posts

OT - Power window problem on van

#1

OT - Power window problem on van

Dave Smith, Longview, WA

>This morning the Admiral was pulling out of the garage and lowered the drivers side window to give me more instructions for the day. The window will not go up and the passenger side window is very sluggish when lowered and raised with either door switch. Is it a good assumption that the switch on the drivers side has malfunctioned? I wanted a second opinion before getting an other switch.

Dave Smith

Doing just about everything except woodworking in Longview, WA.

Re: OT - Power window problem on van

#2

Re: OT - Power window problem on van

Ron Hildreth

>Dave,

Your mileage may vary, but the windows on my '95 GMC pickup both got real sluggish, and I found that by taking off the inside door panel and lubing all the gearing and scissor linkage, they started working like new again. Local body shop charged me thirty bucks, but was cheaper than new motors and or switches. I'd try that, first. Test drive the windows a time or two, and I think you'll know before putting the inside panel back on if this will be the ticket or if there's something else wrong.

Ron in Iowa

Re: OT - Power window problem on van

#3

Thanks Ron, I may try that first.

Dave Smith, Longview, WA

>

Re: OT - Power window problem on van

#4

Power to the motor.

Dave Smith, Longview, WA

>I checked the switch operation and there is power to the motor. Polarity changes with switch operation but the motor no move. Can't figure out how to manually move the window. I am taking it to a body shop in the morning. Those guys make a living fixing car windows.

Dave Smith

Recited the 6 factor formula at the window but it still don't work in Longview, WA.

Re: OT - Power window problem on van

#5

Re: Power to the motor.

Gary Evans Tallassee, TN

>Hey Dave,

Try tapping on the brush end of the motor (usually the end away from the drive gear.) Many times a faulty window motor just has some sticky brushes.

Gary

Re: OT - Power window problem on van

#6

or the bruch sprongs or the brishes may be gone.

henthorn

>I replaced the brush assembly on my LTD with a ball point pen spring and a piece of carbon I got from a flashlight battery. Worked great.

Re: OT - Power window problem on van

#7

Re: OT - Power window problem on van

Glenn Madsen

>Good luck. We just paid $500+ to have the window parts redone on my dad's GMC Envoy, about 5 years old, at a local body shop. The dealer got over $380 just for the parts.

The dealer got $525 to redo my 1999 GMC Sierra, when the motor and control unit died in a screaming rain storm some years back. Rental car for the day and a half that they had it didn't help, either.

But these are wear items, and generally the trucks run to 225k miles, before they get donated any more...

Re: OT - Power window problem on van

#8

Motor died

Dave Smith, Longview, WA

>I took the car in this morning and it didn't even rain. It is raining now but the window is supposed to be fix this afternoon. The body shop found an after market motor which will save a lot. Total is estimated to be less than $200.00. Of course I haven't picked it up yet.

Dave Smith

Passed through my shop twice today in Longview, WA.