Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

I want a new planer

Posts

I want a new planer

#1

I want a new planer

jared

>I am in the midst of finishing a new house that we are building on the north shore of Lake Superior[thats a stealth gloat by the way]. I am planing down native white cedar and some hard maple to make all of the interior trim. I have a couple of old planers, an old ryobi and a sears. Neither work particularly well and my wife gave me the ok to get a new one. A friend has a dewalt 735 two speed unit and speaks very highly of it and it looked like just what I would like to have. However when I read the reviews on Amazon there seemed to be a lot of problems with it. I know some of them are older posts. The two major complaints involved a gear that broke constantly and the short life of the blades and also some complaned that boards did not feed into the machine very well. I was wondering if Dewalt has addressed these problems? Has anyone had experience with the latest production of the 735s? I dont want to buy a machine that locks me into buying a new set of disposable blades every other time I use it. Thanks in advace Jared

Re: I want a new planer

#2

Re: I want a new planer

Kevin Rabenaldt

>I am going to make a suggestion that is counter to your post, but hey, I will make it anyway. Why not take the wood to someone with a heavy duty planer that can do a superior and fast job of this. I think the smaller planers probably work fine but for big jobs all at once you can not beat the power of a good planer. The small planers are great for the woodworker where the requirements are brief and not that often.

Kevin

Re: I want a new planer

#3

suggestion

Bill Tindall, E.TN

>try to find an old Delta or Powermatic or Parks 12 or 13" machine. they are built to last and do a fine job. I shoved thousands of feet of oak through a 13" Delta before we bought a larger machine.

Re: I want a new planer

#4

Re: I want a new planer

Larry Clinton At Frankfort (Central)., Indiana

>Jared, I had an older version of the Dewalt lunchbox (I think DW 733) It did a pretty good job, but my son bought me a stationary 20" Yorkcraft planer with the Byrd head as a retirement gift. I will sure recommend you look at the stationary planers. I doubt you want to spend the $$$'s to buy a 20", but from what I have seen the smaller Jets, Grizzly's, Steel City's are all pretty much the same construction and the 13" ~ 15 units don't cost much more than the top of line lunchbox planers. There is a world of difference in the construction of the stationary units - and the results. I have virtually no snipe unless I run a board more than 6' long - even then I have no snipe if I make sure I support (Lift the end of the board as it enters and exits the planer). A stationary should last the rest of your life with minimal maintenance and will run 8 hours a day (or more) without problems. If you are going to make all your trim - You may want to look at a planer - molder, although I have never used one, they look like they would work well for a home shop.

Re: I want a new planer

#5

I have one

Tony - Memphis

>I have had mine for a while now. I've not had any problems with it at all. It really does a nice job. The surface is so silky smooth, you can't help but feel it! I haven't noticed the blades wearing prematurely, but I am not really a heavy user. I had an old Delta before though and I haven't noticed any difference. I plane mostly mahogany, maple, cherry, and some walnut for reference. No snipe, great chip clearance, very easy to change knives, feels good and solid - very heavy too, very handy removal depth gage thing, etc. I've been very happy with it. I bought the extension tables too. I had read that they were pretty much a must.

Tony

Re: I want a new planer

#6

Re: I want a new planer *LINK*

Garry

>I would highly recommend that you check out other machines. I have this planer and thought I liked it at first but now I hate it.

The firs hardwood board you run through it you will have chips in the knifes and the first tearout you have may break the dust shoot leading to the fan.

RUN from this purchase.


http://www.superwoodworks.com

Re: I want a new planer

#7

Re: I want a new planer *LINK*

Curt Harms

>If I were in your position making a lot of trim, I'd look seriously at the Jet or Grizzly planer-molder. I haven't used one but watched an older Grizzly and it did a nice job on crown molding in one pass. It will also plane and does have an induction motor which is quieter and probably longer lived than the universal motored models. I understand the knives are interchangeable between these two.

http://www.grizzly.com/products/13-Planer-Moulder/G1037Z


Jet Planer Molder