High Teck Router Table almost done ... *LINK*
rarebear
>The top is made from HDPE plastic 3/4" thick and fence is made for 80/20 extrusions and has a Woopecker Insert for a PC that I just re-drilled for a Millwaukee 3 1/2hp
I am still planning some micro adjusters and will add more pics tonight and increase the size of all for your viewing pleasure..
Total cost was about $50-$70 no counting the insert..
All raw materials came from eBay
Thanks for looking
Johnny K
LINK to More Pics of My Router Table



