Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Sandpaper for 16-32 Sander

Posts

Sandpaper for 16-32 Sander

#1

Sandpaper for 16-32 Sander

Ray Binnicker

>Ok, I'm finally tired of paying $29.00 for 4 rolls of sandpaper for my Performax 16-32 sander ! I seem to be using it more and more these days and these prices hurt. Where do you folks get your rolls, and do you use the "Cut-them-yourself" rolls?

Thanks in advance

Ray Binnicker

Re: Sandpaper for 16-32 Sander

#2

Rick L

Re: the answer!

Rick L

>Go to www.industrialabrasivse.com You can look at klingspor and others but you can't beat the price, quality and service at IA! I'm a purchasing agent for a commercial company and buy more than most folks.

Re: Sandpaper for 16-32 Sander

#3

Re: Sandpaper for 16-32 Sander *LINK*

rarebear

>I know nothing about your machine but I boyabrasives at eBay

You can find odd sized belts for pennies on the dollar there..

I bought some belts for mt 3M purple 6x48 belts for $5 each and they list for $19 at MSC

Just remember there is not a deal here ever week it may take some time to find what you want.. I had bought a case of 8" 3M Regalite disks 500 for $27, these sell for a buck each.. This was a one time deal but I keep looking :)


Business & Industrial>>>>>Abrasives

Re: Sandpaper for 16-32 Sander

#4

the URL did not work

Robert R Clough - Thorncraft

>I copied it, pasted it and "went". I was told it could not be found.

Re: Sandpaper for 16-32 Sander

#5

https://commerce.riverweb.com:8003/index.html

Scott in Eastern Iowa

>

Re: Sandpaper for 16-32 Sander

#6

Re: the URL did not work

Rick Jackson,TN

>check the spelling of abrasives in Rick's link

Re: Sandpaper for 16-32 Sander

#7

Perhaps I should learn to read.

Robert R Clough - Thorncraft

>

Re: Sandpaper for 16-32 Sander

#8

DIY El Cheapo sander strips.

Basil

>I don't know if the Wood woking shop in Charlotte NC still has the sand paper bargain box or not. It had all kinds of klingspor leftover sand paper in it. I haven't been in their store in a pretty good while. Anyway, I used to buy a lot of short but wide (scraps) sanding belts out of it (40 to 120 grit). (I have a Delta 18/36) The belt scraps that I was buying weren't always long enough to cut 2" strips out of so I'd cut them 2 1/2" or maybe even 3" wide so they didn't have to be so long.

Worked out pretty good for me and were dirt cheap. Still got a lot of the scraps I can cut up when needed.

Re: Sandpaper for 16-32 Sander

#9

Re: Sandpaper for 16-32 Sander

Ray Binnicker

>Thanks ya'll. I knew I could depend on the smartest bunch of folk in the world. I just ordered 56 yds of 120 grit from industrialabrasives.com. Best price I've seen.

Thanks again.

Ray Binnicker