Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Chop Shop Hood

Posts

Chop Shop Hood

#1

Chop Shop Hood

Ray Newman

>Over on the Fe$tool Owners Group, a poster mentioned a SCMS dust collection device called the "Chop Shop Hood."

Finally found a link for it @:

http://www.fastcap.com/products.aspx?id=3802

Has anyone tried this out & how did it work or didn�t work??

Is it cumbersome to set up? Footprint?

Over the years, I tried several attachments, hoods, etc., to control the dust from my Hitachia SCMS & nothing really worked.

Re: Chop Shop Hood

#2

Re: Chop Shop Hood

mdclor

>I haven't seen it and their site certainly isn't very informative, but I would also like to know more.

Re: Chop Shop Hood

#3

Re: Chop Shop Hood

Ed Mulligan, Cape Cod

>Ray -

I have a Downdrafter hooked up to a cyclone dust collector. It works well, gets 99 % of the crumbs and 99.9 % of mdf dust. Search the archives for further discussions.

Ed

Re: Chop Shop Hood

#4

Re: Chop Shop Hood

Ray Newman

>Ed: about 6 years ago, I bought & installed a Down Drafter for my 10" Hitachi SCMS. I connceted it to my cyclone via 6" hose.

On narrow stock, it worked reasonably well, but on wide stock (6-10"+), it was not very good @ picking up the dust.

Re: Chop Shop Hood

#5

Re: Chop Shop Hood

Ed Mulligan, Cape Cod

>Hi Ray,

I'm puzzled that your unit didn't work.

I've had my Downdrafter since 2004, attached to a Hitachi 10" SCMS. It has a 4" port. I generally use a sacrificial fence and table for 'zero clearance' cutting. On wider stock, there are some crumbs coming off the blade that hit the fence, bounce back, and don't get to the Downdrafter, but these crumbs aren't a health hazard. When it's time to clean up, there is no fine powder dust (i.e. the bad stuff) on or around the saw.

When I first used it I put a long (~ 12") hose on the saw exhaust port (where the dust bag goes). I found that the long hose made dust collection worse. I took the hose off and put on a plastic ell to direct the dust into the Downdrafter. Works well.

Ed

Re: Chop Shop Hood

#6

Re: Chop Shop Hood

Ray Newman

>I was surprised too since it is supposed to be the cat's meow.

When I bought mine directly from the designer, he asked what make saw I had & I told him. His reply was that it will work on a Hitachi 10" SCMS, but it might take some tinkering to work most effectively. No matter what I did, I still had airborne dust.

Re: Chop Shop Hood

#7

Re: Chop Shop Hood

Ed Mulligan, Cape Cod

>Bummer. Hope you find something that works for you. Before I got the Downdrafter I had to aim my air cleaner exhaust at the chop saw station to blow away the airborne stuff.

Re: Chop Shop Hood

#8

Re: Chop Shop Hood

Doug Reynolds in Seattle

>I believe Fastcap, a Washington State Company, bought the rights to the Downdrafter, also a Washington State company. I have seen them at my Woodcrafetr store in Seattle. They were very expensive.