Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Adhesive Recommendation for IPE

Posts

Adhesive Recommendation for IPE

#1

Adhesive Recommendation for IPE

Steve F

>I am planning to build some outdoor furniture out of IPE. I am looking for recommendations on an appropriate adhesive that will withstand the weather in upstate NY (late spring through early fall). I've seen urea resin used in a ShopShot article, and have seen references on the internet to West System epoxy. Any suggestions are appreciated. Thanks.

Steve - makin' sawdust while the snow piles up....

Re: Adhesive Recommendation for IPE

#2

Titebond waterproof

Clint Searl, at the base of Haycock Mtn

>

Re: Adhesive Recommendation for IPE

#3

do some testing

Bill Tindall, E.TN

>We faced this problem in building wooden planes out of Ipe. I will summarize by saying that some of the suggestions we got apparently had not been tested because they produced weak joints with mostly glue failure, not wood failure.

To test, assemble a lap joint. After the adhesive has cured place on leg of the lap joint in vise and bash the other. If you do not see substantial wood failure, that is the joint failure is in the adhesive, that adhesive was not a good choice.

The epoxy for oily woods sold by Lee Valley worked in our application, which did not involve outdoor conditions.