Burl cap
Mike Schwing from Maryland
>I've had this maple burl cap lying around for years, never quite knowing what to do with it. I've had several ideas, all gone by the wayside. So I finally dug into it with the carving tools. The pointy ends were just too cool to remove, so I left the bottom natural, and the interior follows the natural, wavy contour of the exterior of the cap. Finished with shellac, it is nearly 20" across the long dimension. Comments welcomed!
If the photo looks unusually colorful (click on the small one to get a larger version please) it is because I've been experimenting with HDR (High Dynamic Range) photography. You take 3 exposures of the same scene and "blend" them together. One exposure is normal, the other two are +/-2. The results are quite stunning!




