Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Lighting in Display Cabinet

Posts

Lighting in Display Cabinet

#1

Lighting in Display Cabinet

JohnM in Mid Mich

>Building a cherry display cabinet to house my old camera collection. Thinking about putting rope/cable lights inside the front corners. Main carcass of the piece is about 50 inches tall, 34 inches wide, and 12 inches deep. Somewhat remotely Arts and Crafts-ish design. Any recommendations? Are LED's appropriate/affordable? Vendors? Thanks, John

Re: Lighting in Display Cabinet

#2

Alan Young

Consider Tape Lighting *LINK*

Alan Young

>I built a pair of bookcases where the clients wanted some lighting.

I lined the inside of the face frames with Tape Lighting. This product features a series of low voltage 1-watt bulbs that run off a 24-volt transformer.


Check out the link below for more details on the lighting system.

Alan


Tape Lighting

Re: Lighting in Display Cabinet

#3

Re: Consider Tape Lighting

JohnM in Mid Mich

>That is exactly the look I want. Thanks.

John

Re: Lighting in Display Cabinet

#4

Re: Consider Tape Lighting

Jennifer@Indy.USA

>Alan these looks really nice. I've been wanting to either build or buy a glass enclosed display cabinet to house my growing collection of turned objects. The light choice is a factor because of the heat. I have used the rope light under cabinets and they do get hot. Hot enough to make the clips that hold them brittle and eventually break up. How are these tape lights with the heat? I can't have heat build up in an enclosed display cabinet with wood turned do-dads.

Thanks,

Jen

Re: Lighting in Display Cabinet

#5

Re: Lighting in Display Cabinet

Mike in Savannah

>I'm looking into using LED's, but at the "component level" for a low heat, low profile and very focused light source. There are many, many choices out there but to do this you'll need to know something about electronics, at least at the level of powering LED's (DC supply voltages, current limiting resistors, etc). This is not a very cheap way to accomplish this but you'll likely to never have to replace a bulb, use very little power and as small as 30awg wire.

Try looking at Newark electronics: www.newark.com then search for: LED

(Nice looking cabinets Alan! Thanks for that link for tape lights. I'll use those too for sure)

Re: Lighting in Display Cabinet

#6

Alan Young

Re: Consider Tape Lighting *LINK*

Alan Young

>Jen-

We chose this tape light system because of it's low heat build up qualities. The bulbs are each 1 watt. You can purchase the system with the lights spaced every 2", 3" or 4" as per your requirements. I think this project had them spaced 3". More pics are here:

http://woodwardwoodworks.com/CottageBookcases.html

OR below is the Shop Shot of the building process. E-mail me if you have any further questions.

Alan


Illuminated Bookcases

Re: Lighting in Display Cabinet

#7

Re: Heat buildup

Joanne Adler in Pt. Pleasant, PA

>Alan, what about the transformer? Does that heat up much? I have kitchen cabinets that have wires waiting for undercabinet lights. The guy who built the kitchen had planned on similar lighting. It's in the barn, but the transformer looks huge and as if it would get really hot. I'm looking for an alternative.

Re: Lighting in Display Cabinet

#8

Alan Young

Re: Heat buildup

Alan Young

>Hi Joanne,

I don't recall transformer heat being an issue, but I'll contact the customers and ask if they notice anything regarding the heat. I know that all the other options we looked at were unsatisfactory, either because the lights were too obtrusive or hot-(we first looked at using halogen puck lights).

The transformers are large so the space they consume should be planned for. I used one transformer for both cases. In this project I though about using two smaller transformers-but it was decided that one larger transformer would be fine.

Alan

Re: Lighting in Display Cabinet

#9

Cheap, Simple LED's *LINK*

JohnM in Mid Mich

>Thanks to all for comments. Haven't decided what to do yet, but here is another option, I guess: get a string of LED Christmas Tree lights... I could probably tuck these tightly into the front corners, maybe even do some judicious cutting and splicing?


img

70 LED White Mini Lights Set

Re: Lighting in Display Cabinet

#10

Thanks Alan. Much appreciated!

Jennifer@Indy.USA

>