Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Guitar Display Case

Posts

Guitar Display Case

#1

Chet Kloss

Guitar Display Case

Chet Kloss

>I've been asked by a friend to build a wall mounted Guitar Display Case. After several Internet searches, I've found quite a few examples but they're all pretty boring (mostly just simple boxes, horizontal or vertical, with glass doors).

So here's my question:

Anybody out there build one of these and would you be willing to share any pictures, plans, etc.?

Thanks,

,,,,,,,,,,,,Chet

Re: Guitar Display Case

#2

Lee Gordon

Re: Guitar Display Case *LINK*

Lee Gordon

>I don't build these but my friend's company does. Quite a few pictures on his website but I don't think he's ready to share his plans at this time.


Case Sensitive Guitar Cabinets

Re: Guitar Display Case

#3

Ellis Walentine

Interesting design problem, Chet

Ellis Walentine

>The wall cases I've seen all tend to be rectangular boxes with or without glass doors. Glass that size gives me the willies, so I tend to favor open cases, maybe with padded velvet at the back and cushioned hanging pegs for the head of the guitar. Any other shape but rectangular is likely to look unusual, but that's not to say you couldn't work some interesting corner details into the box. (I'm visualizing a few as we speak but I don't have a sketch pad or scanner handy at the computer where I am at the moment.)

This begs a good design discussion. What are the parameters for a showcase like this? (Protection of the instrument, padding where necessary.) Is total enclosure important? (Probably not. A sheet of glass could break and damage the instrument. Not to mention that it would need perennial cleaning.)

The only other question I can see is the aesthetics of the case. One factor in the answer would be the style of the room where the case will be displayed. Will a modern (unadorned, clean-lined) design work there? Or, does it need to have moldings or details that mesh with the surroundings somehow?

Design is the skill that woodworkers probably need most but get least. I'd love to open that discussion.

Ellis

Re: Guitar Display Case

#4

Re: Guitar Display Case

Ed Mulligan, Cape Cod

>This one's along the lines of a trophy case:

http://www.acousticguitarforum.com/forums/showthread.php?t=106053

Re: Guitar Display Case

#5

Lee Gordon

Re: Interesting design problem, Chet

Lee Gordon

>I believe the reason the glass is important is so that the guitars can be seen while, at the same time, the humidity inside the case can be controlled. I suppose shatter-proof safety glass could be employed. I'll ask my friend who sells cases if that is what he uses.

Re: Guitar Display Case

#6

Chet Kloss

More Details

Chet Kloss

>Thanks to all for the responses thus far.

Here's a few more details:

The case is for a single guitar (a custom electric Gibson Les Paul) and will be hung in a new office building in Nashville Tennessee.

I'm not locked into either a vertical or horizontal presentation and while I'm trying to come up with something more than a basic box, the case shouldn't be so "significant" that it distracts from the guitar (I'm finding that requirement fairly hard to deal with :)

With regard to the glass door, I guess it is necessary to prevent dust build up and to some extent, to keep the guitar safe. Though I'd rather have it open, my wife tells me that its because I have no concept as to what it takes to keep things clean.

As I mentioned in my first post, there are a lot of hanging wall cases on the internet but few that are inspirational. I'll let you all know what I wind up with. In the meantime, I appreciate any and all comments, suggestions, and plans.

Thanks,

,,,,,,,,,,,,,,,Chet