Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

jet dust collector 1182 - should I or not?

Posts

jet dust collector 1182 - should I or not?

#1

jet dust collector 1182 - should I or not?

Eric in Los Gatos

>I have seen a Jet 1182 dust collector (with new bearings) for sale at $150.00. I plan to install central dust collection in my shop but will only run one tool at a time. I haven't been able to find specs on the net.

Is anyone familiar with this model and do you think it would serve for central collection in a system that would have 6 in runs about 40ft long with some elbows in them?

Any advice would be much appreciated.

Eric in Los Gatos

Re: jet dust collector 1182 - should I or not?

#2

JL

Re: jet dust collector 1182 - should I or not?

JL

>I am not familiar with the Jet 1182 DC - but...

I used a Shop Fox 1.5 hp double bag unit for a few years to power my DC system. It pulled about 1100 CFM. I used it with a 25' run of main pipe. It worked reasonably well to pull the sawdust for my planer, tablesaw, router table and my bandsaw. I don't see any reason why a Jet with similar power couldn't do the same thing.