Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

OT- How to resurface Corian countertops

Posts

OT- How to resurface Corian countertops

#1

Bart Goldberg

OT- How to resurface Corian countertops

Bart Goldberg

>Fiends,

I have put some nasty scratches in my Corian counter top. This is due to the fact that this counter is near my shop and is often called in to use when doing assembly, finished, etc.

I would expect that my ROS could be used with increasingly finer grits of abrasives to do this repair.

1) Do I need to sand the entire surface?

2) What grit should I start with? (320?)

3) For a matte finish, where should I stop?

4) I noticed that Woodcraft now sell a set of hook & loop micro mesh pads for your ROS. Do I need these?

Thanks

Bart

Re: OT- How to resurface Corian countertops

#2

Re: OT- How to resurface Corian countertops

tek-Brunswick, Ohio

>Finish up with a Red Scotch Brite pad. It should blend into the rest of the top finish.

Re: OT- How to resurface Corian countertops

#3

Re: OT- How to resurface Corian countertops

tek-Brunswick, Ohio

>Actually I mean maroon. I guess there is one that bright red and very coarse.

Re: OT- How to resurface Corian countertops

#4

Re: OT- How to resurface Corian countertops

Jim Dillon

>Bart,

Also look at the Abralon sanding pads for solid surface materials like corian. Google something like "abralon sanding pads corian" and you will get lots of info. Success seems to depend somewhat on the color of the corian and the finish you desire, i.e. matte, satin, gloss etc. I have no direct experience with these pads, but have seen them used on a repair to my corian kitchen countertop and they worked well. Hope this helps.

Jim

Re: OT- How to resurface Corian countertops

#5

Re: Abralon *LINK*

Mark Mandell - Gone Round In Jersey

>Are available to Homestead Finishing click on "abrasives" and scroll.


Homestead

Re: OT- How to resurface Corian countertops

#6

Re: OT- How to resurface Corian countertops

Sonja Lemon Sacramento Ca.

>Have you thought about trying to fill the scratches first before sanding? Corian makes an adhesive that blends very nicely with the surface. It comes in 2 part packets. The seal between the 2 packets is broken and then kneaded until it gets warm. It has to be used within about 15 minutes, before it hardens. It's been a few years since I used it. Check with your local cabinet shop or Corian dealer. When it sets, it can be sanded or scraped level. Be sure to use a dust mask. It may be possible to use epoxy to fill the scratches too.