Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Jointer follow up: which 6" Griz?

Posts

Jointer follow up: which 6" Griz?

#1

Jointer follow up: which 6" Griz?

Dan Mitchell

>This is a follow-up to my earlier post. After carefully considering all the helpful input, I was leaning toward an 8" jointer, seriously looking at the Grizzly models. Ran this prospective purchase past my wife, who reflected upon the price (TOTALLY ignoring all the more COMPELLING aspects of the proposal!) and reminded me of, (ahem) "other financial commitments" we had coming up (SO WHAT if the property taxes are due in 6 weeks, it's not like the county can RE-POSSESS THE HOUSE, RIGHT ?!? ;-)

So ANYway, I'm afraid I'm once again reduced to a paltry 6".

In jointer width.

I'm considering the following Grizzly models, which all look pretty similar. I'm leaning towards the $365 G0452, which is mid-pack in terms of $$$ & has the largest fence. If anyone sees any reason to prefer one of the others (something I'm missing) please let me know.

http://grizzly.com/products/6-x-46-Jointer/G0654

http://grizzly.com/products/6-Jointer/G0452

http://www.grizzly.com/outlet/G1182ZHW

Another advantage I must concede about the 6" models is their size & (especially) weight. We live within driving distance of the Grizzly Bellingham outlet, so I can pick up the smaller jointer in my wife's Impreza wagon, saving shipping. I'd probably have to have the 8" shipped (don't have a truck) with lift gate service that's another $170 or so. Plus I don't really have anyone to help me move & setup the machine, that being the case, the added 250-some pounds of the 8" is a real issue.

Re: Jointer follow up: which 6" Griz?

#2

Re: Jointer follow up: which 6" Griz?

Barry Irby

>Dan, I can't help you choose a Griz jointer, but I can tell you that I have gotten by nicely with a 6" Delta for over thirty years. I would suggest you buy which ever one has the longest bed.

If you have a planer, look into a sled to allow you to flatten wider boards.

I have flattened boards much wider than my six incher by removing the fence and running the board right over the middle. Then I use a block plane to knock down the high spots left on the rest of it. I have also have a hand held power planer I use sometimes. I would use my Stanley hand plane, but my son stole the blade out of it to build a hand plane and it went the way fo the buffalo. Not really gone, I just don't know where it went.

Re: Jointer follow up: which 6" Griz?

#3

Look for used one, then

Mark Goodall - ATL - tooljunkie

>This is the way I figure it. If most people buy a 6" and then upgrade to an 8", then there should be quite a few used 6" jointers on the market. You should be able to find quite a deal.

I found a new $500 6" Delta Jointer, that I got for $400 on sale. Then a year later when I went to get my $1400 8" DJ20 I sold the 6" one for $275 to some guy who was extremely happy to get great jointer for a such low price.

Sure, you'll find some people who want to sell you one for $10 less than they paid for it 10 years ago, but you'll find other's that are glad to pass on a little inexpensive happiness.

Happy Woodworking!

Re: Jointer follow up: which 6" Griz?

#4

Re: Jointer follow up: which 6" Griz?

Dan Mitchell

>Thanks Barry, yes I think the 6" will meet my needs for the foreseeable future. Past personal experience as well as what I've seen available used these days tells me if I do need to upgrade down the road, I can probably get a decent price for the Grizzly.

Re: Jointer follow up: which 6" Griz?

#5

Re: Look for used one, then

Dan Mitchell

>Mark-I'd love to find a good used one at a fair price, and I have been looking, but I think your square-deal pricing is the exception; the examples I've seen definitely fall more into the "10 years, subtract 10 bucks" category ;-) One listing on Craigs List has a Jet JJ6CSX for $345. I'd rather pay another $20 & get a new Grizzly with new blades, a warranty & no history of possible abuse. Another one I saw recently was an 8" Woodtek for $675. Straight cutters, non-parallelogram. You can get a new 8" Griz for that. But apparently people pay it. I know when I sold my Unisaw & 6" Delta jointer on Ebay prior to moving here, I was quite surprised to get very nearly what I had paid for them.

Given the price of the Grizzlys, and the good marks they get from current owners, I think it's hard to go wrong. The 6" will probably do me for some time, and be saleable in the future should I need bigger.

Thanks for your reply.

Re: Jointer follow up: which 6" Griz?

#6

Re: Look for used one, then

Larry Clinton At Frankfort (Central)., Indiana

>Your correct Mark. When I upgraded to my spiral head 8",I sold my old 6" Griz to a friend for $100 - It was in good shape with a new set of knives installed, (gave him the old set). I checked the beds for co-planer etc. and they were within .003" full length. I just wanted him to have a planer as he was going to retire about a year after I did. I didn't want the hassle of selling it on Craigslist or Ebay just to make a $100 or so.

Re: Jointer follow up: which 6" Griz?

#7

Re: Look for used one, then

ScottS

>Here's a hint: the asking price on Craig's List often has nothing to do with the selling price.

I bought my 6" Rigid jointer via Craig's List. The owner was asking $350 or something like that. I paid significantly less after showing him a stack of ads with lower prices, a wallet full of twenties, and a Ford F250 ready to haul the tool away... When I sell items on Craig's List, I always price them high. Seems like every Craig's List buyer wants to feel like they're getting a great deal or that they're a master negotiator. They simply will not pay the asking price, no matter how reasonable it might be! So, I add a few bucks to the price (probably $50-100 in the case of a 6" jointer) and then I "let" the buyer negotiate me down to something more reasonable. Works every time!

Re: Jointer follow up: which 6" Griz?

#8

Noticed that too

Mark Goodall - ATL - tooljunkie

>I like Craiglist much better than eBay.

Craiglist - price you see is the highest and may be lower

eBay - price you see is the lowest and will be higher

Craigslist - you can see it before money changes hands

eBay - you're at the mercy of good photography, misleading text and the honesty of the seller

Craigslist - You know where you're going and what it will cost (you in time) to pick it up. Worst case is it's not as descibed and you can have a scenic drive home, or stop of somewhere on the way home for something else.

eBay - after you get gouged for handling costs and then shipping costs, just try to get your shipping overpayments back. And you're stuck when you see it's not as described.

Craiglist - usually seller wants the item gone, and gone quickly, don't have time to waste waitign for auctions, and need to clear something out of the garage to keep the peace at home.... so they sell to clear out.

eBay - usually seller is more interested in higher prices and can wait longer to get more money.

Craiglist - you're likely to get a better price

eBay - you're more likley to over pay

Happy Woodworking!

Re: Jointer follow up: which 6" Griz?

#9

Re: Look for used one, then

Dan Mitchell

>"I didn't want the hassle of selling it on Craigslist or Ebay just to make a $100 or so."

Yeah, I know the "OBO" is somewhat implied. But similar to the above sentiment, to me the hassle of dickering with some stranger over the price of a used piece of equipment with possible issues to maybe save $100, when I can get a new, known-quantity machine with a warranty and for a reasonable price just isn't that appealing. If I would see something that's unique or an obvious deal, that's one thing. So far after some months of looking, that hasn't been the case around here.

Thanks for the replies.

Dan