Just finished this up this afternoon. The main wood is sapele with wenge feet and ebony and mother of pearl inlay. the pulls are ebony and tagua nut ivory. The door and drawer front cores are all made out of italian bending polar it is easy to work with and doesn't tend to spring back, which is nice when doing curves.
>I wasn't sure what to do about pulls until yesterday morning when I came up with these, my original idea was to buy some premade tagua nut pulls a re turn them to a nicer shape, but I really like using ebony for pulls.
>Thomas this is an amazing piece of work. Your vision for design and attention to detail are in an amazing place. It's always a treat to scour your pictures and see what you've been up to.
Is that a commissioned piece, or your own? It is most unusual. The long legs make it so very elegant, and the figure is spectacular. Did you design it yourself, or in collaboration? Beautiful job.
>IMO, the design is wonderful -- simple, elegant, reminiscent of classic sideboards but much more lyrical as a result of the combination of curves and the thin legs. What a beauty, Tom. Nice work!
It is not an easy to build a piece where the wood and design don't fight each other for attention. That double curve is subtle and not easily pulled off.
Thomas S Stockton------WebKitFormBoundary7eA4cctb+
Thomas S Stockton------WebKitFormBoundary7eA4cctb+
Guest
Re: new piece of furniture
Thomas S Stockton------WebKitFormBoundary7eA4cctb+
>George,
It is a spec piece and the design was my own. A lot of the work I've been doing lately has been either fairly heavy design wise or larger jobs and I wanted to do something that was lighter.
Italian bending ply is a three layer product that is a little less than 1/8". The outer plies are poplar, I don't know who imports it but it is readily availble on the west coast. Meaning if they carry it in Redding CA you should be able to get it locally. I like it for curved doors much better than the thicker bending plywood that is called "wacky wood" or "wigglewood" it makes a door that is much more rigid and the faces are tight grained and I can veneer directly onto them.
My original idea was to use pommele sapele but I decided it would be to busy unless I did some sort of border around it to contain it visually which would have taken away from the clean lines. Also I've done a lot of that kind of stuff lately and wanted to try out some other ideas.
That's funny because I look at the spoons you create and think the same thing about how impressive they are and that I won't be doing anything like that soon.
>Beautiful work as always. If you don't mind since this is a spec piece could you say what it is selling for and a bit about what it took to make time wise. I am always interested to learn how work of this quality is produced.
The price would probably be in the $6k range. It probably took 90 hours to build. Once I get good pics I was going to send in a shop shot with the pictures I took while building it.