Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Help... Casters for Mobile base

Posts

Help... Casters for Mobile base

#1

Help... Casters for Mobile base

jeff

>Hi all

I need some help here with my Mobile bases.

I hate the ready made crap that companies sell for mobile bases.

A supposed 900lb base hardly moves a 400lb machine.

And the footprint of these kill you.

I built a great base for a real heavy jointer, but the casters move poorly on my rough concrete floor.

Is my thinking correct.... The larger the wheel the easier to move over the rough concrete?

If yes, what happens to me is then the machine stands too high.

If I build a unit with the wheels on the side, then I trip on them, or the machine looses alot of space.

My shop is way too small for all the machines, so I'm stuck with having the big stuff on wheels.

I need help here. Or ideas. Or a source for wheels that work.

Jeff

Re: Help... Casters for Mobile base

#2

Re: Help... Casters for Mobile base

Neal in San Jose

>You are correct that everything else being equal, a large wheel is easier to move on a rough surface than a small one. You might also consider a hard wheel instead of the soft wheel typical of the borg casters. Try Graingers.com for a low profile, hard phenolic caster. Part number 1VJD7 $14.07 for a swivel, and 1VJD6 $9.34 for a rigid one. Both have a 1000 lb rating. You can get carried away and go with an iron or even stainless wheel, but I couldn't find a small one on a quick search of their catalogue.

Re: Help... Casters for Mobile base

#3

New question

jeff

>What are the problems or benefits of the different type of material that the wheels are made of or covered with?

And which turns best?

Re: Help... Casters for Mobile base

#4

I like the red ones Woodcraft sells...

John in New Mexico

>I also buy all swivels. No problem moving 400-600 pound machines on homemade bases with the smallest model caster.

Stay as far away as possible from any Harbor Freight casters.

Re: Help... Casters for Mobile base

#5

Re: Help... Casters for Mobile base

John Hollaway

>Jeff, I agree with John from New Mexico 100%. I've have a fairly small shop that requires that most of my equipment ride on casters. I've tried many brands of casters, and the wheels on most are way too soft to allow for easy movement. Do yourself a big favor and buy the red-wheeled casters from Woodcraft. I buy the ones that swivel. They lock both the wheel from rotating and the swivel from swiveling. And if you watch their fliers, they occasionally go on sale I believe for just about 50% off. Good luck.

Re: Help... Casters for Mobile base

#6

Re: New question

Larry Clinton At Frankfort (Central)., Indiana

>With all other thing equal - The hardest material rolls easiest IE: easiest to hardest: steel/cast iron - phenolic - hard urethane - hard rubber - soft rubber. Softer wheels have two advantages - less wear on floor and adsorb some vibration. The type of bearings have an influence Sleeve are harder to roll than ball bearing. The larger the wheel the easier it will roll (all other things being equal). I have had very good luck using the cheap mobile base kits (three wheel with cam lift) from Rockler. However the largest tool on these is my 8" Grizzly joiner. My Unisaw, MM-16 band saw and 20" Yorkcraft planer came with their own mobile bases. As far as using larger wheels without raising the machine. You can construct a "saddle" mobile base which puts the wheels out past the ends or side of the machine. This will probably require it be made out of steel tubing and welded for heavier machines (over 500 lbs), lighter machines could use a bolted up base made from square tubing and plate stock.