OT Pellet stove tune up
Forrest Addy
>I'm cross-posting this to reach a maximum number of people.
My pellet stove is 13 years old. I'm good about keeping it cleaned and I use good fuel in it. While it's given good service and cut my heating costs in half it's performance has declined. I have noticed it's producing some soot where it once produced a fine light brown ash.
Out of curiosity when I was cleaning the fire pot of caked residue, I ran a drill into the air holes. Brown scale sprinkled from the drill. Then I ran a taper pin reamer into the holes. Much brown scale. I estimate the air holes were about 30% occluded on the diameter with baked on combustion products so I reamed all the holes to just clean them up to bare metal.
So here's the lesson. The air holes in the firepot are calibrated to provide the right amount of combustion air kinda like a carburator with the choke fully open. If the air holes scale up they allow less air and the fire produces more soot. It's like driving with the choke on. Check the firepot during annual pellet stove maintenence, the air holes may need cleaned out just to bare metal.
Probably most people already know this but it was a revelation to me. I thought the fan was pooping out.



