Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

gun stock finishing

Posts

gun stock finishing

#1

gun stock finishing

John K Jordan

>I'm looking for recommendations on finishing a stock for a rifle (new walnut). Anyone specialize in gunstocks?

Any web sites with good information? Google told me about a bunch of people who would like to do it for me.

JKJ

Re: gun stock finishing

#2

Re: gun stock finishing

Randy Johnson Connersville, IN

>If you are not in a hurry, nothing beats multiple coats of hand rubbed oil.

Re: gun stock finishing

#3

Not a specialist!

Lee Schierer - McKean, PA

>I refinished a gun stock and for grip on a shotgun with oil based polyurethane. I have been very pleased with the results. It accomplished my objective of protecting the wood against getting wet while hunting and it has held up well to the brush and weeds.

Lee

Re: gun stock finishing

#4

Re:It's Hard to beat Birchwood Casey Tru Oil

Dale Stansbery

>

Re: gun stock finishing

#5

Re: gun stock finishing

Clint Searl, at the base of Haycock Mtn

>When I carried an M1, it was Linspeed. Now it's nitrocellulose or alkyd lacquer.

Clint

Re: gun stock finishing

#6

depends on use

Bill Tindall, E.TN

>For a rifle I intend to carry I prefer an oiled finish- tung or linseed oil. Such a finish doesn't show scratches and it is easy to renew by giving it a recoat every now and then. My go to Winchester Model 24 was done this way in the 1950's and the stock is still fine. Everything with a factory finish is chipped and scratched and needs to be redone in oil....when I get to it.

A varnish type of finish shows off fancy grain better.

Re: gun stock finishing

#7

Re: depends on use

Gene Gauss

>Many years ago, I refinished a couple of rifle barrels following a procedure in one of the gun magazines. It required sanding to a fairly fine grit (220 I think), and then "whiskering" the stock, i.e., moistening the surface of the stock with water on something like a well wrung out facecloth, and then using a flame to dry the surface, thereby raising the whiskers. The whiskers were then sanded off with the finest grit you used initially. This was repeated several times until no more whiskers were raised. Next a somewhat thinned clear finish (varnish I think in those days - perhaps gloss polyurethane today). Next it was sanded lightly with 400 grit wet/dry sandpaper (used dry) to take off everything but what was left in the pores. The pores look like shiny flecks since the 400 grit didn't touch them. This was repeated until no flecks showed after sanding, indicating that the pores were all filled. Last, a final finish of full strength varnish/poly was applied, and if you didn't want the gloss, it was rubbed out with rottenstone.

Re: gun stock finishing

#8

Re: gun stock finishing *LINK*

John Cotten

>I used to make and refinish gun stocks for my great uncle who was a gunsmith years ago. We bought all of our finish for gunstocks from Brownells, the largest gunsmithing supply company in the nation. Here is the link from the search page that has a listing of all of the gunstock finishing supplies they have.

If you are finishing a flink lock or old percussion with a curly maple stock, traditional finish would be natural walnut dye powder mixed with alcohol, let dry, then buff with steelwool, then several coats of boiled linseed oil, buffed between coats till you get the desired sheen you are after.


img

Gun stock finishing supplies

Re: gun stock finishing

#9

Re: gun stock finishing

Larry Clinton At Frankfort (Central)., Indiana

>Although by no means a pro I refinished several in my life for myself. I have always used BLO (Boiled linseed oil). These were usually older used guns (all I could afford at the time) and I hunted a lot as a teenager. The first rifle I finished was badly scarred up, I hand scraped the entire finish off and smoothed the wood using pieces of broken glass from discarded jars. (This makes a very sharp scraper that works well, although it is easy to stain the wood with your blood :~)). I then coated the stock with several coats of BLO, rubbing it in with my bare hands until they were hot, then wiping it off. I continued to coat the stock about every time I cleaned the gun the rest of the year. I never had to touch it again for about 10 years of hunting - It looked very good and water ran off like a ducks back. The only reason I re-coated it was to remove some scratches (after 10 years), then I only scraped the scratches out and rubbed in more BLO in those area's.

Re: gun stock finishing

#10

Re: gun stock finishing

John K Jordan

>Thanks for the comments - this gives me some good things to explore.

JKJ