Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Shop cabinets - buy or build?

Posts

Shop cabinets - buy or build?

#1

Shop cabinets - buy or build?

John E

>I'm finally in the process of trying to upgrade my unfinished basement shop, and have decided I need a row of base cabinets along one wall. I have been debating buying new, cheapie stock cabinets from the big box (still not cheap), buying "used" from a kitchen rehab (best option, but I haven't been able to find anything particularly suitable), or building my own. Only problem with building my own is that my shop time is somewhat limited, and there are so many other "fun" projects I would rather do, and a shop cabinet is pretty far down the "fun" list. I was just curious how others have outfitted their shop?

Thanks,

John

Re: Shop cabinets - buy or build?

#2

Partice before you do the Kitchen

Dustmaker Mike

>I am planing on building my own shop cabinets this year in order to pratice. I plan on doing a bath vanity then tackle the kitchen. If I am ever home long enough. Really I have very limited time in the shop but I would still build my own that way I know they are the way I want them and of course it give you a chance to show off or cover your design changing oppertunites.

Re: Shop cabinets - buy or build?

#3

Re: Partice before you do the Kitchen

Ken Garlock, Collin County Texas

>I totally agree, Mike.

I have built 8 base cabinets based upon NYW Workshop Hutch. I didn't build the hutch, and I modified the drawers and in some cases I replaced a set of drawers with with double doors. Two of the bases are screwed together to a single cabinet for 4 different applications.

OK, my point is that I get just a little better with each build, and learn to not buy any wood from the borgs. The old adage that practice makes perfect has some truth in it.

Happy Sawdust,

Ken

Re: Shop cabinets - buy or build?

#4

Re: Shop cabinets - buy or build?

Bill Schreiber, Litchfield, NH

>Hi,

I have not had to buy any of the shop cabinets that I have. I have managed to scrounge from friends or family who are we doing their kitchens or from work. Office furniture is often a very good option for the frugally challenged. The old and the decrepit don't look good in today's modern office but certainly is more than adequate in my shop.

I have raided dumpsters, pick through People's trash on trash day and basically evidenced not a single bit of personal pride. I have truly turn this into a personal crusade. Just keep your eyes open; you would be amazed what people throwaway.

Regards,

Bill Schreiber

Re: Shop cabinets - buy or build?

#5

Re: Shop cabinets - buy or build?

Tony - Memphis

>Well, for me, building boxes is pretty boring and I don't like redundancy or plywood. I would buy. That's my plan for the next shop. My shop is pretty small too. I can't really handle sheet goods very well. Some of the cabinets are so "cheap" that it'd be hard to beat their prices. I'd rather be building fun stuff too. To each his own though. I have built a few cabinets to use as tool bases and such and they are pretty pitiful. I used whatever scraps I had laying around. I usually pain them to get some color in the shop. I may have a pic of one....

Tony

This is a planer cabinet that is on casters...the pic was taken before all the hardware came in from Lee Valley.


img

Re: Shop cabinets - buy or build?

#6

Re: Shop cabinets - buy or build? *LINK*

John Cotten

>Build. They are really simple and not that expensive. Build them frameless. Edge band the edges of the plywood. Here is a quick list for a basic 24" base cabinet.

2 3/4" x 31-1/2" x 23 3/4" sides

1 3/4" x 22-1/2" x 23 3/4" bottom

1 3/4" x 22-1/2" x 2" front upper rail

1 3/4" x 22-1/2" x 4" rear upper rail

1 1/4" or 1/2" x 24" x 31-1/2" back

This will build your basic box. Pre-drill & screw the sides to the bottom, then pre-drill & screw the upper rail to the top of the sides. The edge should be facing the front of the cabinet. Then pre-drill the sides and screw the rear upper rail into the the rear of the sides of the cabinet. Depending on the use of the cabinet and the location (attached to wall or free standing island I either screw or staple the back onto the lower cabinets.

Use full extension drawer side mount slides, 22" long for the drawer sides. The you subtract 1 1/8" from the over all interior width to ger your drawer dimensions.

Drawer box 5-3/8" material for upper drawer

2 pieces 3/4" x 5-3/8" x 21-3/8" drawer front and rear

2 pieces 3/4" x 5-3/8" x 22" drawer sides

1 piece 1/4" x 21" x 21-5/8" drawer bottom

I usually assemble with pocket screws, although, 3/8" x 1-1/2" will suffice for a quick assembled utility cabinet.

The drawer front will be 7" x 23-7/8"

Door will be 23-7/8" x 23-7/8"

I use salice eurostyle full over lay hinges.

I cut out 10 cabinets and assembled eight of these today. Have a couple of more to do tomorrow. Will take the digital camera to the shop and record the basic cutout and setup for these cabinets tomorrow. Don't be intimidated with alot of dados and all of the other stuff in many cabinet books.

I build professionally with both plywood and melamine. This style cabinet works with either equally as well.

If you want an exceptional reference book with full measurements for several styles of frameless cabinets I would recommend Danny Proulx

Email me if you have any other questions.


img

Building Frameless Kitchen Cabinets

Re: Shop cabinets - buy or build?

#7

Re: Shop cabinets - buy or build? *LINK*

John Cotten

>Build. They are really simple and not that expensive. Build them frameless. Edge band the edges of the plywood. Here is a quick list for a basic 24" base cabinet.

2 3/4" x 31-1/2" x 23 3/4" sides

1 3/4" x 22-1/2" x 23 3/4" bottom

1 3/4" x 22-1/2" x 2" front upper rail

1 3/4" x 22-1/2" x 4" rear upper rail

1 1/4" or 1/2" x 24" x 31-1/2" back

This will build your basic box. Pre-drill & screw the sides to the bottom, then pre-drill & screw the upper rail to the top of the sides. The edge should be facing the front of the cabinet. Then pre-drill the sides and screw the rear upper rail into the the rear of the sides of the cabinet. Depending on the use of the cabinet and the location (attached to wall or free standing island I either screw or staple the back onto the lower cabinets.

Use full extension drawer side mount slides, 22" long for the drawer sides. The you subtract 1 1/8" from the over all interior width to ger your drawer dimensions.

Drawer box 5-3/8" material for upper drawer

2 pieces 3/4" x 5-3/8" x 21-3/8" drawer front and rear

2 pieces 3/4" x 5-3/8" x 22" drawer sides

1 piece 1/4" x 21" x 21-5/8" drawer bottom

I usually assemble with pocket screws, although, 3/8" x 1-1/2" will suffice for a quick assembled utility cabinet.

The drawer front will be 7" x 23-7/8"

Door will be 23-7/8" x 23-7/8"

I use salice eurostyle full over lay hinges.

I cut out 10 cabinets and assembled eight of these today. Have a couple of more to do tomorrow. Will take the digital camera to the shop and record the basic cutout and setup for these cabinets tomorrow. Don't be intimidated with alot of dados and all of the other stuff in many cabinet books.

I build professionally with both plywood and melamine. This style cabinet works with either equally as well.

If you want an exceptional reference book with full measurements for several styles of frameless cabinets I would recommend Danny Proulx

Email me if you have any other questions. The picture at the bottom is of a kitchen I completed last spring with prefinished maple drawers and upper cabinets, and maple veneered doors and drawer fronts.


img

Building Frameless Kitchen Cabinets