Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>25 Feb 2008

Good Morning!!!

I hope that each of you have had a great weekend with family, friends, and with your shop!!

I've been working on the Honey-Do list this past week as I've had a little more time from the day job to work on things around the house. We've been repainting the Great Room. Nothings been done to it since we purchased the house in early 2000. We had to take down the "Duck Border" as well as the border that was behind that....Pink and Blue Rabbits...!!!!! Yeoowww!!!! Pink and Blue Rabbit border???!!!! What were they thinking??!!!!!!!

Patched all the holes in the walls and decided to move the ceiling fan as well. The ceiling in the Great Room is a vaulted ceiling. The only light in the room was the ceiling fan and that was centered on the window and mounted centered on the flat part of the vault closest to the outside wall.!!!!! How dumb was that??!!!! Needless to say that the LOML and I decided to put up a false beam and move the fan to the beam at the peak of the vault. Now, to give you an idea about this single room? It's 27 ft long by 20 ft wide. So it's NOT a small room. Well, because of the new beam we are putting in, I've made time for the shop. I bought some cherry about a year ago for $1.25 per board foot...air dried...and this is what I used to make the beam from.

Today I start building the beam since I'm off work today and I hope to get the beam done and the ceiling fan moved. So I guess I had better "get on the stick" and get to work.

So what did YOU do this weekend?

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments.....

#2

Rebuilt my shower

Dustmaker Mike

>yup I had a little nagging leak ever once in awhile around my shower door. So I took it all apart cleaned it then found where the leak was coming from. I repaired the little hole in the fiberglass then redid the door. This morning was the test and the floor stayed dry. But this was a leak that only happened once in awhile so the jury is still out. Next week I am in MO then back home for a few weeks before I am off again. Maybe I can get my office done. Hardwood floors and finish the shelf in the wall.

Re: WC Weekend Accomplishments.....

#3

Re: WC Weekend Accomplishments.....

George@Colonel's Workshop-Havertown PA

>Good Evening Dennis, and a Happy Monday

I spent time in the shop over the weekend processing the balance of cherry for the double dresser project. I thicknessed most of it to 3/4" and the fall off veneer is about 3/16th. I also glued up the side panela and milled up the lumber for the top, leaving it about 7/8". Then glued that up. I started milling up some trim molding for Charlie's grandmother clock and hit a snag when my new Jessem Mast-R-Lift's insert plate became frozen, preventing me from using a larger diameter bit. That really frosts me, considering how much it cost and how long I had toi wait for it to be delivered. We took advantage of good weather today and bought sufficient poplar to see the dresser project through. No party last night. We were by ourselves, in a very quiet house. Have a great week.

George