Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Which PVA Glue to Use

Posts

Which PVA Glue to Use

#1

Bart Goldberg

Which PVA Glue to Use

Bart Goldberg

>My several year old bottle of Titebond II finally started to go bad and I need to buy a new gallon bottle of glue.

I'd like to know how the members regards the other yellow glue products that are now available, namely the newer Titebond III and the PVA glue available from Lee Valley called 2002 GF glue.

I see that Titebond III supposedly has a 10 minute open time compared to the 5 minute for type II - that is definitely a check in its favor.

Even better is the open time advertised by LV for their PVA glue - 15-20 minutes.

Given that price is NOT a factor - any recommendations to change to one of these others - or should I continue to use Titebond II for general gluing applications?

Best Regards

Bart

Re: Which PVA Glue to Use

#2

Re: Which PVA Glue to Use

Bill Tindall, E.TN

>The regular stuff is the standard of the furniture industry. Its open time can be extended by the addition of 5% water. Except for out door application I have not had any need for the other versions.

Most of my adhesive usage is for edge gluing. For this application the rapid tack of the regular stuff is an advantage.

Re: Which PVA Glue to Use

#3

Re: Which PVA Glue to Use

Mark Mandell - Gone Round In Jersey

>Been using III for several years with good results. Personally, I prefer the faster tack. My glue-ups are primarily panels from 3 to 8 sections, but I don't hesitate to use sub-assemblies. The pic is of a cherry octagonal table I finished rubbing out this weekend. The legs were assembled first and the final glueup was 4 joints for the stretcher tenons and the 8 dowels for the top. TB-III's open time was just fine for this job, and I rather like its 2-hour clamp time.


img

Re: Which PVA Glue to Use

#4

Re: Which PVA Glue to Use

Tom O'Connor

>I'm on my second jug of Titebond III and love it. I like the extra set up time.

Re: Which PVA Glue to Use

#5

Question?

David Yoho

>I haven't tried the Titebond III, and probably won't unless a specific use dictates it. I'm happy using Titebond II or their liquid hide glue. However, I have to wonder - do you use enough glue in a year to justify buying it by the gallon? The last several years I've been buying glue and finish alike. I only buy enough finish for the work at hand so it's always fresh. I only buy enough glue to last a year or less. I have a heated and cooled shop but I still find those items work better when they're fresh.

David

Re: Which PVA Glue to Use

#6

One Answer

Mark Mandell - Gone Round In Jersey

>I buy the stuff in gallon jugs, but I transfer it to 1qt containers with tight caps. I then pull from them in succession. Seems to work fine and I save money, so what's not to like. I do the same with Waterlox and CA glue (which gets stored in the frig).

mm

Re: Which PVA Glue to Use

#7

Re: One Answer

David Yoho

>My only point was that IF the glue goes bad before using it all, did you really save any money? I don't use enough in a year to justify a gallon. That said, I could probably get away with buying that much Waterlox.

David